All Clock Parts

Showing 17–32 of 296 results

  • Clock Pendulum Suspension Spring Clock Pendulum Suspension Spring
    Usually there are three components to a clock pendulum assembly. The pendulum, leader and suspension spring. NOTE: Suspensions do not have to be exact in length, if the clock runs slow then raise the pendulum bob with ...
    Clear
    SUS-A: $9.89$24.89
  • quartz clock hand 10B #H10 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H10: $0.89
  • quartz clock hands 5B #H5 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H5: $0.89
  • Cuckoo Clock Hands Cuckoo Clock Hands
    Cuckoo white celluloid hands. This is for the modern style cuckoo clocks, post 1950 or so, that have the round hole in the minute hand for the bushing (bushing not included with hands). Although these come in a p ...
    Clear
    CU10: $4.89
  • Hermle serpentine mechanical spade hands Serpentine Hands for German Mechanical Clocks
    The most popular choice for German clock movements. These black Serpentine hands come in 4 to 10 inch dial diameters. These fit most German movements in existance. The minute hand has a 2.2mm square mounting hole, the ho ...
    Clear
    CH3Hands: $9.89$19.89
  • quartz clock hands 3 #H3 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H3: $0.89
  • German Hand Nuts German Hand Nuts
    German Hand Nuts 12 Assorted hand nuts for German movements. With this assortment of hand nuts you will get one for your German movement with no problem. However these hand nuts will not work on a cuckoo clock thos ...
    CP9: $9.89
  • Convex Round Clock Glass Convex Round Clock Glass
    Convex round clock glass gets measured from one side to the other, the overall width. Please take into account that the glass has to be wider than the opening in the bezel, but not so big that it is too wide for the glas ...
    Clear
    BZ2: $9.89$69.89
  • Cuckoo Clock Bellow Tops Cuckoo Clock Bellow Tops
    Bellow Tops Bellow tops are the most frequently needed item on a cuckoo clock. These tops come as a pair and get epoxied on the old bottoms just as the old tops were taken off, see the Cuckoo Clock Parts help sec ...
    Clear
    CU4: $14.89
  • Clock Pendulum Leader Clock Pendulum Leader
    Leaders If the old leader is lost, the length of the leader needs to be determined. To determine the length on a German movement, look at the CM number off the back plate of the movement. This measurement is the app ...
    Clear
    Leaders: $14.89$24.89
  • 5 Prong Clock Key Set 5 Prong Clock Key Set
    These two 5 prong clock keys will fit just about every clock winding arbor. ...
    CK8: $19.89
  • Heavy Paper Stock Clock Dial Heavy Paper Stock Clock Dial
    Select Arabic or Roman Numerals, White or Ivory. Measurements are from outside the numeral on one side to outside the numeral on the other side of the round clock dials. (The timetrack diameter) ...
    Clear
    PDIAL1: $0.89$5.89
  • Howard Miller Style High Torque Clock Hands Long High Torque Clock Hands #HTH7
    High Torque hands are long hands that need to go on a high torque battery operated clock movement. The hands have the USA standard 'I' shaft mounting hole in the minute hand. What this means is the hour hand will have a ...
    Clear
    HTH7: $6.89$9.89
  • quartz clock hands 11B #H11 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H11: $0.89
  • Hand Remover Puller Hand Remover Puller
    Removes stubborn hands and gears in a straight motion. Sometimes this would be needed to remove the wheel on the back that lifts the bellow lift wires also. ...
    CU30: $9.89
  • Clock Dial Key Hole Grommets Clock Dial Key Hole Grommets
    Dial Grommets x3 Set of three dial key hole grommets. These are what make the key holes pretty where you wind the clock through the dial. ...
    CP32: $4.89