All Clock Parts

Showing 33–48 of 296 results

  • Vision Visor Magnification Head Band Vision Visor Magnification Head Band
    This magnifier can be worn over glasses. This fits over the head and will be the most convenient magnification for inspecting important components of the clock movement and parts. This quality tool is made here in USA. D ...
    CT17: $24.89
  • Clock Chain Ends Hook and Tab Set Clock Chain Ends Hook and Tab Set
    Hook and ring set for chain driven floor clock models. The chain link only consists of a bent wire that loops around to itself, you only need two needle nose pliers to open the connecting point on the link and install th ...
    CP16: $4.89
  • Cuckoo Clock Hand Nuts
    Cuckoo Clock Hand Nuts 12 pack of assorted hand nuts for the front of a cuckoo clock. These hand nuts secure the hands onto the front of the clock face. Often it is hard to figure out which one you need, this 12 pack in ...
    CU20: $14.89
  • Clock Chain by Movement Maker Clock Chain by Movement Maker
    Clock chain by movement maker. The chain is sold by LPF. Take a section of your old chain and count the links so it matches the LPF (links per foot) that are on the drop down menu below. Most one day cuckoo clocks take 6 ...
    Clear
    Chain: $5.89$24.89
  • Cuckoo Clock Weight Cuckoo Clock Weight
    Cuckoo Weight One day cuckoo clocks usually take the same amount of weight on each chain. So if your missing a weight or two, just look and the number stamped into your old weight and get this same gram amount fr ...
    Clear
    CU5: $14.89$34.89
  • Long Suspensions
    Style A and B are for antique tall case clock movements. Suspension C is the most popular as it covers many antique and antique replica wall and mantle clock movements. Please note style C comes as a three pack as ...
    Clear
    LS: $9.89$14.89
  • Cuckoo Hook and Ring for Chain Cuckoo Hook and Ring for Chain
    The hook goes on one end of the chain to hold the weight up in the air. The ring goes on the other side of the same chain so the chain will not travel into the movement and jam up the clock if the clock was not wound ...
    CU15: $4.89
  • quartz clock hands 12B #H12 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H12: $0.89
  • Clock Hand Washer Assortment Clock Hand Washer Assortment
    Clock Hand Washers 100 Assorted mixed clock hand washers. These go on top the minute hand on some clocks to maintain tension so the hand does not flop around. Item #CP7 $6 ...
    CP7: $9.89
  • Hole End Clock Mainspring Hole End Clock Mainspring
    Instructions The width is measured first and matched up to the width below, then the thickness is measured with a micrometer, then the approximate length. Choose the item number of that mainspring from the order lis ...
    Clear
    HEMSP: $9.89$39.89
  • Polished Clock Weight Polished Clock Weight
    Complete clock weight in polished Brass tone or dark antiqued brass tone, Comes with top and bottom caps, hardware and lead center filler. ...
    Clear
    WEIGHT: $64.89$124.89
  • Loop End Clock Mainspring Loop End Clock Mainspring
    With the mainspring out of the movement, you will need a micrometer and a tape measure. First thing measured is the width, and match it up with the proper section of the chart. After matching the width, see what is the c ...
    Clear
    LESPRING: $14.89$49.89
  • Double Ended Clock Key 4pk Double Ended Clock Key 4pk
    Double End Four most popular double end clock keys. There is always much confusion for people to get the proper double end key, so we offer this set of 4 keys most frequently used. These have the Small end for regula ...
    CK2: $19.89
  • Cuckoo Clock Wire Assortment Cuckoo Clock Wire Assortment
    Wire Assortment Includes bellow lifting wires in various lengths, eye hole wires, cuckoo bird door wires and the bird to door wire. These are the proper lengths and bends that are the most commonly needed in a c ...
    CU25: $14.89
  • Clock Repair Tapered Pins Clock Repair Tapered Pins
    Tapered Pins 100 Brass tapered pins with various diameters. These Clock Parts have many uses in clock repair. They attach some dials, movement plates, suspensions and sometimes hands on the clock. ...
    CP2: $14.89
  • #H7 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H7: $0.89