All Products

Showing 321–336 of 643 results

• turned_in_out Clock Keys and Cranks

  French Style Clock Key

  Single end french style steel clock key available in all sizes. Although this key is the usual style for French clocks, it can be used on any clock. Please use the clock key chart and directions in the tabs to determine what key will fit the clock.

  CK10: $10.00

  View Product

• turned_in_out Gallon Solutions

  Gallon of Clock-Cleaning-Solution Concentrate

  One gallon of cleaning solution concentrate. This formula is for mechanical and manual cleanings. Ideal for antique pocket watches and clocks that have protective coatings. Make that old grime that has built up disappear. The plates and gears will look shiny and new.

  CL12: $88.00

  Gallon of Clock-Cleaning-Solution Concentrate quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  German Clock Hand Nuts

  German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Therefore, Cuckoo clock hand nuts are available on the cuckoo parts page.

  CP9: $10.00

  German Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Chime Accessories

  German Made Bottom Mount Clock Gong

  German Made Bottom Mount Clock Gong. These gongs have a side bushing mount with a round 3 1/2 inch(90mm) wide coil gong, with a 7 inch long threaded base rod.

  GO42: $60.00

  German Made Bottom Mount Clock Gong quantity

  ADD TO CART

• turned_in_out Chime Accessories

  German Made Rear-Mount Clock Gong

  German Made Rear-Mount Clock Gong. These gongs have a center mount with a round 5 1/2 inch(140mm) wide coil gong.

  GO41: $50.00

  German Made Rear-Mount Clock Gong quantity

  ADD TO CART

• turned_in_out Wall or Mantle Clock Kits

  German Mechanical Mantle Clock Kit

  Bell strike wall clock kit’s minimum case requirements are 3 1/4″ deep, 6″ wide with the dial (4 3/4″ with out), 6″ tall with the dial. Like a mechanical watch, this has a balance escapement. Therefore it does not need a pendulum.

  WMKIT5: $225.00

  View Product

• turned_in_out All Products

  Gift Certificates

  This is a virtual Clockworks gift certificate. Provide the recipient with the receipt and let them have fun picking their own presents! The Perfect solution for any occasion and the toughest of people to buy for.

  To

  Separate multiple email addresses with a comma.

  From

  Message (optional)

  500 characters remaining

  Quantity: 1

  1 to each recipient

  : $10.00 - $100.00

  Gift Certificates quantity

  View Product

• turned_in_out Watch Repair Tools

  Glass Brush Set of 3 for Watch Repair

  This is a glass brush set of 3. Simply twist the top to have the brush come out the bottom at whatever length you need. Perfect for use on any glass surface. This set comes in three different sizes of brushes.

  WT30: $10.00

  Glass Brush Set of 3 for Watch Repair quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Gold-Tone Clock Dial Numerals

  Numerals for modern floor clock dials. Measurement options are in the drop down list and are the overall height. The 1 1/8 inch size is for grandmother clocks and the 1 5/16 size is for the grandfather clocks.

  CD2: $20.00

  View Product

• turned_in_out Replacement Electric Clock Movements

  Golden-Hour Clock Electric Motor

  Golden Hour replacement clock motor has a 27 tooth gear. 110 Volts 60 cycles 1/6th RPM

  el5: $160.00

  Golden-Hour Clock Electric Motor quantity

  ADD TO CART

• turned_in_out Wall or Mantle Clock Kits

  Gong-Strike Mechanical Wall Clock Kit

  Gong-strike mechanical wall clock kit’s minimum case requirements are 3 1/4″ deep, 6 1/4″ wide including the dial, 25 1/2″ tall with the dial. Has a 55cm (22") pendulum length from the top of the movement and down.

  WMKIT2: $218.00 – $255.00

  View Product

• turned_in_out All Products

  Grandfather Clock Chime Block

  Chime block in V shape for many grandfather clocks. This fits many of the German made post 1950 floor clocks. Mount it to the back of the clock case with the screws that come with the chime block.

  GO1C: $100.00

  View Product

• turned_in_out Mechanical Clock Chime Rods

  Grandfather Clock Chime Block Back-Strike

  Mount this Grandfather Clock Chime Block Back-Strike to the back of the clock case. The rods are already in into the block and at the perfect pitch. To get the correct block count the rods that are in the block. Measure the length of the longest rod through its mounting block and order that size.

  CBLK-Cstr8: $80.00 - $120.00

  View Product

• turned_in_out Mechanical Clock Chime Rods

  Grandfather Clock Chime Block with Hardware

  Chime block in V shape for many grandfather clocks. This fits many of the post 1950 German made floor clocks. It mounts to the back of the clock case with the screws that come with the block.

  GO1C-B12-27: $140.00

  Grandfather Clock Chime Block with Hardware quantity

  ADD TO CART

• turned_in_out Clock Keys and Cranks

  Grandfather Clock Key Crank

  A grandfather clock key is also called a crank. Available in 8 sizes however if the clock is post WW2 the size needed is always number 8. A number 8 crank will fit all three weight cable driven post WW2 clock with a German made movement.

  CK6: $20.00

  View Product

• turned_in_out Clock Keys and Cranks

  Grandfather Clock Key Crank CK6-8

  A grandfather clock key is also known as a crank. Available in 8 sizes however if the clock is post WW2 it is always a number 8 that the movement takes. A number 8 crank will fit all three weight cable driven post WW2 clock with a German made movement.

  CK6-2-8: $20.00

  Grandfather Clock Key Crank CK6-8 quantity

  ADD TO CART