Showing 49–64 of 650 results
turned_in_out Cuckoo Clock PartsCuckoo Chain Hook Set
Installation of the cuckoo chain hook and ring set is easy. Each link on the chain is only a wire folded into a unsoldered loop only. With two needle nose pliers a simple twist is all that is is needed to open the link.
turned_in_out Hardware for ClocksClock Parts Chime Hammer
The chime hammers are the clock parts that strike the chime rods. Three sizes to choose from and this is the approximate length of the hammer head with the tip and screw. The tips of the hammers come in two ways.CP1: $1.00 – $10.00View Product
turned_in_out Clock Weight AccessoriesClock Chain End Hooks
Hook and ring set for chain driven floor clock models. The chain link only consists of a bent wire that loops around to itself. Only needs two needle nose pliers to open the connecting point on the link and install these pieces.
turned_in_out Round Clock DialsRound White Clock Dial
White round dial in either Arabic or Roman numerals. Available in either thin metal aluminum or PVC (It is like thick fiber paper) Remember to remove the protective plastic coating. The sized listed below are the overall width from side to side.RD4: $3.00 – $15.00View Product
turned_in_out 2Pendulum Quartz Clock Movement QU3
Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This length is based on the minute hand length from the mounting hole to the end. [bulk-discount-shortcode sku="QU3"]
turned_in_out Round Quartz Clock InsertsClock Insert For 1-3/16-Hole #F1A
Clock insert #F1A is a round friction fit clock that is 1 5/16 (33mm) wide. It fits snug in a 1 3/16 (30mm) hole, with an overall depth of 5/16 (7mm). [bulk-discount-shortcode sku="F1A"]F1A: $14.00View Product
turned_in_out Mechanical Grandfather Clock WeightsPolished Clock Weight
Complete clock weight in polished Brass tone, Comes with top and bottom caps, hardware and lead center filler. Please see the information tabs for the weight specifications required for the clock.WEIGHT: $60.00 – $90.00View Product
turned_in_out Hardware for ClocksClock Hand Washer Assortment
100 Assorted mixed clock hand washers used on antique wall and mantle clocks. These go on top the minute hand on some clocks to maintain tension so the hand does not move around.
turned_in_out 2 3/4 Inch (76mm)Maltese Quartz Clock Hands #H3
Maltese quartz clock hands have a nice design that falls between the Serpentine look and Spade. The hour hand is a friction fit and the minute hand mounts with its oblong mounting hole and a nut.H3: $1.00View Product
turned_in_out Oiling and CleaningBrass Bristle Clock Cleaning Brush
A brass bristle brush for cleaning clocks. Behold this beautiful brass bristle brush which brings beauty to big bulky brass. This is to be used on stubborn spots of grime, to be used with cleaning solution.
turned_in_out Clock Keys and Cranks5-Prong Clock Key Set
These two 5 prong clock keys will fit just about every clock winding arbor. With so many sizes there will be one to fit the clock for sure. 5-Prong clock key set will fit all the clocks in the house instead of having one for each clock.
turned_in_out Cuckoo Clock PartsCuckoo Clock Hand Nuts
6 nuts and 6 washers to fit the hand shaft of a post 1950 cuckoo clock. This nut is screwed onto the end of the hand shaft to keep the minute hand in place.
turned_in_out Hardware for ClocksGrandfather Grandmother Clock Chain
Grandfather grandmother clock chain by movement maker or links per foot LPF. Count the links on the old chain so it matches the LPF on the drop down menu.Chain: $6.00 – $25.00View Product
turned_in_out German Mechanical Clock PendulumsHeavy-Duty Clock Pendulum Drive
The pendulum drive is a heavy-duty battery unit that can swing any mechanical clock pendulum. Uses only two C cell batteries and is very strong. It test ran fine with the largest metal pendulum produced in the modern world with added weight, swung no problem.
turned_in_out Hardware for ClocksClock Repair Tapered Pins
Used in clock repair these tapered pins come in an assortment of 100 sizes and diameters. These Clock Parts have many uses in clock repair. They attach some dials, movement plates, suspensions and sometimes hands on the clock.
turned_in_out Clock Pendulum PartsUrgos Clock Pendulum Suspension
Suspension springs for some styles of Urgos floor clock movements. The square grandmother clock sized movement may take the smaller sized spring. Rectangle grandfather movements take the larger size. However this is not all they used, more often they used suspension A.SUS-B: $10.00 – $12.00View Product
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.