Battery Operated Clock Movements

Showing 1–16 of 44 results

• turned_in_out Time Only Clock Movements

  Time-Only Quartz Clock Movement

  When replacing a Time-only quartz clock Movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

  M2: $14.00

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Movement Hardware

  Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

  Q-HW: $0.75

  Quartz Clock Movement Hardware quantity

  ADD TO CART

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Steel Hanger

  Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

  Q-HANG: $0.40

  Quartz Clock Steel Hanger quantity

  ADD TO CART

• turned_in_out 2

  Quartz Battery Clock Movement

  To replace a AA battery quartz clock movement, it is required to measure the post on the old movement. This is the wider threaded portion that mounts the movement by means of a hex nut. Hands sold separately.

  M2-B:

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 3in-Hole #F7

  Clock insert #F7 is a round friction fit clock that is 3 1/2 (90mm) wide. It fits snug in a 3 inch (76mm) hole, with an overall depth of 1 3/16 (30mm). [bulk-discount-shortcode sku="F7"]

  F7: $14.00

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 2-3/8-Hole #F4

  Clock insert #F4 is a round friction fit clock that is 2 3/4 (73mm) wide. It fits snug in a 2 3/8 (60mm) hole, with an overall depth of 1 inch (25.4mm). [bulk-discount-shortcode sku="F4"]

  F4: $14.00

  View Product

• turned_in_out High Torque Clock Movements

  C-Cell High Torque Clock Movement #HT2

  The powerful C-Cell High Torque Clock Movement is the strongest on the market. There is no stronger battery operated unit than this one. Make a large clock out of anything such as barn wood, wood barrel tops.

  HT2: $20.00

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 1-3/8-Hole #F1

  Clock insert #F1 is a round friction fit clock that is 1 7/16 (37mm) wide. It fits snug in a 1 3/8 (35mm) hole, with an overall depth of 3/8 (10mm). [bulk-discount-shortcode sku="F1"]

  F1: $14.00

  View Product

• turned_in_out 2

  Pendulum Quartz Clock Movement QU3

  Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This length is based on the minute hand length from the mounting hole to the end. [bulk-discount-shortcode sku="QU3"]

  QU3-B:

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 1-3/16-Hole #F1A

  Clock insert #F1A is a round friction fit clock that is 1 5/16 (33mm) wide. It fits snug in a 1 3/16 (30mm) hole, with an overall depth of 5/16 (7mm). [bulk-discount-shortcode sku="F1A"]

  F1A: $14.00

  View Product

• turned_in_out German Mechanical Clock Pendulums

  Heavy-Duty Clock Pendulum Drive

  The pendulum drive is a heavy-duty battery unit that can swing any mechanical clock pendulum. Uses only two C cell batteries and is very strong. It test ran fine with the largest metal pendulum produced in the modern world with added weight, swung no problem.

  HDPend: $30.00

  Heavy-Duty Clock Pendulum Drive quantity

  ADD TO CART

• turned_in_out 2

  Premium Chime Clock Movement QU40

  Best sound quality on the market. This unit will chime as if it was a big grandfather clock. Also has volume control and an automatic night silence option. Please scroll down on this page to read all about it. [bulk-discount-shortcode sku="QU40P"]

  QU40P-B:

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Pendulum

  A quartz clock pendulum rod and bob. The bob comes in three sizes as listed on the order menu. Overall max length is 16 inches. This will work on any quartz clock movement offered by Clockworks.

  Q-BOB: $6.00 – $8.00

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 1-5/8-Hole #F2

  Clock insert #F2 is a round friction fit clock that is 1 13/16 (45mm) wide. It fits snug in a 1 5/8 (41mm) hole, with an overall depth of 8.5mm [bulk-discount-shortcode sku="F2"]

  F2: $14.00

  View Product

• turned_in_out 2

  Seiko Chiming Clock Movement

  Seiko durability in a quartz chiming clock movement. Plays choice of Westminster or Whittington on the quarters and then strike out the hours. Has an auto night feature if the chimes are not wanted at night.

  QU30P-B:

  View Product

• turned_in_out 2

  Quartz Chime Clock Movement #QU22

  Reliable and durable this chiming quartz clock movement is made by Takane. Simplistic in its functions and works as a good replacement for many quartz clock movements. [bulk-discount-shortcode sku="QU22P"]

  QU22P-B:

  View Product