Shop by Category
- 241 Hermle Clock Movement
- 261 Hermle Clock Movement
- 340/341 Hermle Clock Movement
- 350/351 Hermle Clock Movement
- 451 Hermle Clock Movement
- 461 Hermle Clock Movement
- Hermle Clock Movement 1050/1051
- 1151 Hermle Clock Movement
- 1161 Hermle Clock Movement
- 1171 Hermle Clock Movement
- 130/131 Hermle Clock Movement
- Hermle Clock Movement 140/141
- Chain Driven Movements
- Cable Driven Movements
- Mechanical Movements
- Hermle Clock Movements
- Kieninger Clock Movement
- Urgos Clock Movements
- Jauch Clock Movement
- American Clock Movement Reproductions
- Spring Driven Movements
- Cuckoo Clock Movement
- Weight Driven Movements
- Mechanical Clock Kits
- Clock Parts
- Wall or Mantle Clock Kits
- Grandfather Clock Kits
- Grandmother Clock Kits
Showing 161–176 of 204 results
turned_in_out Chain Driven Movements03102 Urgos Clock Movement or 3/18 or 03026…
The UW03102 CHAIN DRIVEN Urgos clock movement plays Westminster chime every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 116cm movement with a 53mm hand shaft length.
turned_in_out Chain Driven MovementsUW32333 Urgos Clock Movement or 32110 or 32145
UW32333 Urgos clock movement plays choice of three songs every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 93cm movement with a 37mm hand shaft length.
turned_in_out KieningerNEW SPS Kieninger Clock Movement
The SPS 54cm Kieninger Clock Movement is wound up with three mainsprings and lasts 8 days on a single wind up. Westminster with 5 hammers on the side the movement.
turned_in_out Cable Driven MovementsNEW 9-Tubular Bell Kieninger Clock Movement
9-Tubular Bell Kieninger Clock Movement is known as the HTU. This is the only 9 tube that Kieninger has created, so there will be no confusion on getting the right one.
turned_in_out Emporer6-inch-Round-Dial 141-031, 141-041 Silver-Trim
6-inch-Round-Dial 141-031, 141-041 Silver-Trim made in Germany. Drilled to fit the winding arbors of a 141 or 150 series Hermle clock movement. Has the feet on the back side to lock into the front plate of the clock movement.
turned_in_out Wall or Mantle Clock KitsMechanical Westminster Vienna Clock Kit
Mechanical Westminster Vienna clock kit's minimum case requirements are 4 1/2″ deep, 8″ wide. Pendulum length 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.
turned_in_out Wall or Mantle Clock KitsWestminster Vienna Regulator Clock-Kit
Westminster Vienna Regulator Clock-Kit has a minimum case requirement of 4 1/2″ deep, 7 1/2″ wide. Pendulum length 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.
turned_in_out Sligh241-843 Hermle Clock Movement
The 241-843 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the back that will strike a gong or bell. The movement will strike out the top of the hours, and then once for the half hour.241-843: $270.00 – $370.00View Product
turned_in_out Ridgeway130-627 Hermle Clock Movement
The unit runs 8 days on a single wind. It has three hammers below the unit that will strike out the hours a the top of the hour, and strike once for the half hour.
turned_in_out Spring Driven MovementsAnsonia Reproduction Clock Movement
A time and strike Ansonia replacement clock movement made in Japan. The pendulum length where it will keep time is 13 inches, measured from the hand shaft and all the way down.
turned_in_out Clock PartsHermle 140 Clock Movement Parts Side Diagram
Hermle clock movement parts. New parts for the 140 / 141 clock movement for servicing the clock. These are the parts seen on the side of the movement.140 Parts Side: $10.00 – $110.00View Product
turned_in_out Chain Driven MovementsUW32363 Urgos Clock Movement or 32/11 or 32102
UW32363 Urgos clock movement plays choice of three songs every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 80cm movement with a 65mm hand shaft length.
turned_in_out Chain Driven MovementsJauch PL93 Clock Movement Kit
The obsolete Jauch PL93 clock movement will have a mark of PL93 or just 93 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in there.PL93 Kit: $712.50 – $832.50View Product
turned_in_out Sligh1051-051 Hermle Clock Movement
The 1051-051 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.1051-051: $435.00View Product
turned_in_out Sligh1051-031 Hermle Clock Movement
The 1051-031 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.1051-031: $349.00 – $435.00View Product
turned_in_out Emporer7in Dial-Bezel-Glass for 340-341
7in Dial-Bezel-Glass for 340-341 series clock movements. Made in Germany with black Arabic numerals. This dial is on a dial pan, has a hinged bezel with convex glass. Has a 6 inch time track diameter (152mm).
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.