Mechanical Movements

Showing 33–48 of 205 results

• turned_in_out Chain Driven Movements

  241-030 Hermle Clock Movement

  The 241-030 Hermle Clock Movement come in both chain driven or cable driven styles. 241-030 Hermle Clock Movement are all pendulum units with a 85 x 98mm plate size.

  241-030Clock: $210.00 – $303.00

  View Product

• turned_in_out Hamilton

  1051-030 Hermle Clock Movement

  The 1051-030 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.

  1051-030: $397.50

  View Product

• turned_in_out Suspension Springs

  Tall-Case Clock Suspension Spring

  Tall-Case Clock Suspension Spring for antique clocks. This one fits the popular tall floor clock made in England or USA with the big bell on the top. This is the spring the holds the pendulum up in the air and lets it swing.

  LSus-A: $15.00 – $65.00

  View Product

• turned_in_out Hamilton

  350-020 Hermle Clock Movement

  The Hermle clock movement 350-020 is a Westminster Chime unit with five chime hammers below and takes a number 8 clock key. The clock movement will come already oiled and ready to install Includes an improved balance for ease of fine timing.

  350-020: $360.00

  350-020 Hermle Clock Movement quantity

  ADD TO CART

• turned_in_out Chain Driven Movements

  451-033 Hermle Clock Movement

  451-033 Hermle Clock Movement is a Westminster Chime unit with 5 hammers on the side. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.

  451-033: $345.00

  View Product

• turned_in_out Chain Driven Movements

  NEW SK Series Kieninger Clock Movement

  The SK Series Kieninger Clock Movement have a hand shaft length of 36mm. This is a Westminster unit that is chain driven. Plate size is the size of the outer plates of the gear sandwich.

  KIEN-SKS: $300.00 – $450.00

  View Product

• turned_in_out Grandmother Clock Kits

  Grandmother Clock Movement Kit GMKIT5

  Grandmother Clock Movement Kit This quality grandmother clock kit has a Westminster chime movement that is progressive at the quarter hours. After the chime it will strike out the hours at the top of the hour. It includes a moon dial and a chime silence switch.

  GMKIT5: From: $639.00

  View Product

• turned_in_out Hamilton

  341-021 Hermle Clock Movement

  The Hermle 341-021 is a Westminster Chime unit with five chime hammers below. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.

  341-021: $270.00

  View Product

• turned_in_out Hamilton

  131-080 Hermle Clock Movement

  The 131-080 Hermle Clock Movement runs 8 days on a single wind. It has two hammers towards the top with a included bell. The movement will strike out the top of the hour via the bell, and then once for the half hour.

  131-080: $202.50

  View Product

• turned_in_out Grandmother Clock Kits

  Westminster GrandMother Clock Kit GMKIT4

  This quality grandmother or grandfather clock kit has a Westminster chime movement that it progressively at the quarter hours. Then it will strike out the hourly count when its done with the chime.

  GMKIT4: $899.00

  View Product

• turned_in_out Hamilton

  131-030 Hermle Clock Movement

  The 131-030 Hermle Clock Movement runs 8 days on a single wind. The movement will strike out the hours on the top of the hour, and then once for the half hour.

  131-030: $202.50

  View Product

• turned_in_out Grandmother Clock Kits

  Bell Strike Clock Kit GMKIT7

  This quality chain driven Bell clock kit will strike the hours on a nice deep sounding bell. On the half hour it will strike only once.

  GMKIT7: $475.00

  View Product

• turned_in_out Chain Driven Movements

  Jauch 78 Clock Movement

  The obsolete Jauch PL78 clock movement will have a mark of PL78 or just 78 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in.

  PL78 Kit: $405.00 – $480.00

  View Product

• turned_in_out Wall or Mantle Clock Kits

  Gong-Strike Mechanical Wall Clock Kit

  Gong-strike mechanical wall clock kit’s minimum case requirements are 3 1/4″ deep, 6 1/4″ wide including the dial, 25 1/2″ tall with the dial. Has a 55cm (22") pendulum length from the top of the movement and down.

  WMKIT2: $299.00

  View Product

• turned_in_out Cable Driven Movements

  351-830 Hermle Clock Movement

  The 351-830 Hermle Clock Movement is a Westminster Chime unit with 5 hammers on the side. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut

  351-830: $397.50 – $483.00

  View Product

• turned_in_out Cable Driven Movements

  461-853 Hermle Clock Movement

  461-853 Hermle Clock Movement is a Westminster chime unit with three weights that hang on cables. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut

  461-853: $472.50

  View Product