Mechanical Movements

Showing 49–64 of 204 results

• turned_in_out Wall or Mantle Clock Kits

  Gong-Strike Mechanical Wall Clock Kit

  Gong-strike mechanical wall clock kit’s minimum case requirements are 3 1/4″ deep, 6 1/4″ wide including the dial, 25 1/2″ tall with the dial. Has a 55cm (22") pendulum length from the top of the movement and down.

  WMKIT2: $299.00

  View Product

• turned_in_out Emporer

  1161-850 Hermle Clock Movement

  1161-850 Hermle Clock Movement is a triple chime chain or cable driven unit with three weights. This is a rectangle shaped movement with the movement plate size of 140 x 200mm and takes a size #8 crank.

  1161-850: $555.00 – $618.00

  View Product

• turned_in_out Emporer

  350-060 Hermle Clock Movement

  The Hermle 350-060 is a Westminster Chime unit with five chime hammers on the back and takes a number 8 clock key. The quality German made movement comes oiled and includes its improved balance for ease of fine timing.

  350-060: $390.00

  350-060 Hermle Clock Movement quantity

  ADD TO CART

• turned_in_out Wall or Mantle Clock Kits

  German Mechanical Mantle Clock Kit

  Gong-strike wall clock kit’s minimum case requirements are 3 1/4″ deep, 6″ wide with the dial (4 3/4″ with out), 6″ tall with the dial. Like a mechanical watch, this is equipped with a balance escapement, therefore does not need a pendulum.

  WMKIT5: $239.00

  View Product

• turned_in_out Emporer

  130-020 Hermle Clock Movement

  The 130-020 clock movement is an 8 day clock on a single wind. It has three hammers below the unit that will strike out the hours at the top of the hour and strike once for the half hour.

  130-020: $240.00

  130-020 Hermle Clock Movement quantity

  ADD TO CART

• turned_in_out Emporer

  461-853 Hermle Clock Movement

  461-853 Hermle Clock Movement is a Westminster chime unit with three weights that hang on cables. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut

  461-853: $510.00

  View Product

• turned_in_out Spring Driven Movements

  Antique Mantle-Clock Movement Replacement

  Replacement movement made in India for the USA made time strike movements commonly found in mantle-clocks. These are more like 10 year movements instead of the long lasting USA units made in the antique times.

  MVT3: $169.00 – $199.00

  View Product

• turned_in_out Emporer

  Bell Strike Clock Kit GMKIT7

  This quality chain driven Bell clock kit will strike the hours on a nice deep sounding bell. On the half hour it will strike only once.

• turned_in_out Spring Driven Movements

  Time-Only Mechanical Clock Movement Kit

  Replacement movement made in India for the USA made Time-Only Clock Movement cases such as Banjo clocks. These are more like 10 year movements instead of the long lasting USA units made in the antique times.

  TOMECH: $100.00

  View Product

• turned_in_out Chain Driven Movements

  UW03124 Urgos Clock Movement or 3/15 or 03109

  The UW03124 Urgos clock movement plays choice of three songs every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 100cm movement with a 53mm hand shaft length.

  UW03124: $862.50

  UW03124 Urgos Clock Movement or 3/15 or 03109 quantity

  ADD TO CART

• turned_in_out Emporer

  241-080 Hermle Clock Movement

  The 241-080 Hermle Clock Movement runs 8 days on a single wind. It has one hammer on the top that strike one included bell. The 241-080 Hermle Clock Movement will strike out the top of the hours, and then once for the half hour.

  241-080: $270.00

  View Product

• turned_in_out Emporer

  451-030 Hermle Clock Movement

  451-030 Hermle Clock Movement is a Westminster Chime unit with 5 hammers on the side. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.

  451-030: $375.00

  View Product

• turned_in_out Wall or Mantle Clock Kits

  8-Day Mechanical Wall Clock Kit

  8-Day mechanical wall clock kit’s minimum case requirements are 3 1/4″ deep, 6″ wide with the dial (4 3/4″ with out), 11″ tall with the dial. Has a 25cm (9 7/8″) pendulum length from the top of the movement and down.

  WMKIT4: $263.00

  View Product

• turned_in_out Kieninger

  NEW AEL Kieninger Clock Movement

  The AEL Kieninger Clock Movement is wound up with three mainsprings and lasts 8 days on a single wind up. Westminster chime with 5 hammers below the movement.

  KIEN-AEL: $330.00

  NEW AEL Kieninger Clock Movement quantity

  ADD TO CART

• turned_in_out Grandfather Clock Kits

  Triple-Chime Grandfather Clock Kit GFKIT101

  The Triple-Chime kit is a standard size for large grandfather clock cases. Includes a German made mechanical clock movement that is cable driven. The three song options are selected by a switch that goes through the dial.

  GFKIT1: From: $1,834.00 $1,535.30

  View Product

• turned_in_out Chain Driven Movements

  UW32316 Urgos Clock Movement also 32/45 or 32/33…

  UW32316 Urgos clock movement is a 93cm movement with a 37mm hand shaft length. If the old unit says 32316, 32/45 or 32/33 or 32198 this is the proper new Urgos clock movement everything will be the same as it was.

  UW32316: $570.00

  UW32316 Urgos Clock Movement also 32/45 or 32/33 or 32198 quantity

  ADD TO CART