Clock Movements

Showing 177–192 of 229 results

  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Movement Hardware

    Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

    Q-HW: $0.75
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Pendulum

    A quartz clock pendulum rod and bob. The three sizes for the bob are in the list in the drop down menu. The overall max length is 16 inches. This will work on any quartz clock movement sold by Clockworks.

    Q-BOB: $6.00$8.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Pendulum Rod

    This is the pendulum rod for a quartz battery operated pendulum movement. It is 16 inches at its longest length. This can be shortened to any length less than 16 inches.

    Q-ROD: $3.00
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Movement Parts and Accessories

    Quartz Clock Steel Hanger

    Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

    Q-HANG: $0.40
  • launch

    View Product

    View more

    turned_in_out Mechanical to Quartz Conversion

    Quartz Conversion Grandfather-Clock Moon-Dial

    A genuine mechanical phase of the moon clock dial that we modify to accommodate the QU40 quartz movement. This dial must attach to the wood case. The moon disk is a decoration only. It will not turn.

    QCMoon: $100.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    Regula-72 Cuckoo Clock Movement

    The three weight Regula-72 cuckoo clock movement. Has an 8 day run time on a single wind up with the three 1750 gram pine cone weights.

    R72: $355.00$750.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Kits

    Round Dial Grandfather Clock Kit

    Round dial grandfather clock-kit's minimum case requirements are 8" deep, 12" wide, 52" tall. Any smaller clock case and this kit will not work. The German made grandfather clock movement is triple chime and cable driven.

    GFKIT6: $1,600.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Viking

    Round Silver Trim Roman Clock Dial for 1161-853

    This 13 inch (330mm) wide dial fits the Hermle mechanical clock movement 1161-853. Winding arbor holes are all ready in it as well as the one for the second hand sweep indicator. White dial with 10” time track and a slot for chime settings at III.

    WRGT1161.13: $150.00
  • launch

    View Product

    View more

    turned_in_out Chiming Pendulum Quartz Clock Movements

    Seiko Chiming Clock Movement

    Seiko durability in a quartz chiming clock movement. Plays choice of Westminster or Whittington on the quarters and then strike out the hours. Has an auto night feature if the chimes are not wanted at night. 3 1/4″ x 5 1/4″ x 1 5/16″

    QU30P-B:
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandmother Clock Kits

    Side-Strike Tall Case Clock Kit

    Side-Strike Tall Case Clock-Kit has a minimum case requirement of 4″ deep, 11″ wide including the dial (6 1/2" without), 49″ tall with the dial. Has a 100cm (39 1/2") pendulum length from the top of the movement and down.

    GMKIT8: $950.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Suspension Springs

    Tall-Case Clock Suspension Spring

    Tall-Case Clock Suspension Spring for antique clocks. This one fits the popular tall floor clock made in England or USA with the big bell on the top. This is the spring the holds the pendulum up in the air and lets it swing.

    LSus-A: $30.00$78.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandmother Clock Kits

    Tall-Case Grandfather Clock Kit

    Tall-Case Grandfather Clock Kit with a German made clock movement. It is chain driven with an 8 day run time on a single wind.

    GMKIT6: $1,350.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    Time-Only Mechanical Clock Movement Kit

    Replacement movement made in India for the USA made Time-Only Clock Movement cases such as Banjo clocks. These are more like 10 year movements instead of the long lasting USA units made in the antique times.

    TOMECH: $100.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Time Only Clock Movements

    Time-Only Quartz Clock Movement

    These movements use quartz hands that are less than 12 inches long. When replacing a movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

    M2: $18.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Kits

    Triple-Chime Grandfather Clock Kit GFKIT1

    The Triple-Chime kit is a standard size for large grandfather clock cases. Includes a German made mechanical clock movement that is cable driven. The three song options are selected by a switch that goes through the dial.

    GFKIT1: $1,800.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandmother Clock Kits

    Triple-chime GrandMother Clock Kit GMKIT2

    This quality Triple-chime Grandmother Clock Kit has a Triple-chime chime movement that it progressively at the quarter hours. Then it will strike out the hourly count when its done with the chime.

    GMKIT2: $1,250.00
    View Product