Clock Movements

Showing 193–208 of 233 results

  • launch

    View Product

    View more

    turned_in_out 130/131 Hermle Clock Movement

    130-627 Hermle Clock Movement

    The unit runs 8 days on a single wind. It has three hammers below the unit that will strike out the hours a the top of the hour, and strike once for the half hour.

    130-627: $225.00
  • launch

    View Product

    View more

    turned_in_out Wall or Mantle Clock Kits

    Westminster Vienna Regulator Clock-Kit

    Westminster Vienna Regulator Clock-Kit has a minimum case requirement of 4 1/2″ deep, 7 1/2″ wide. Pendulum length 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.

    WMKIT7: From: $1,188.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    Ansonia Reproduction Clock Movement

    A time and strike Ansonia replacement clock movement made in Japan. The pendulum length where it will keep time is 13 inches, measured from the hand shaft and all the way down.

    FC-34-93-3: $250.00
  • launch

    View Product

    View more

    turned_in_out Colonial

    Jauch PL93 Clock Movement Kit

    The obsolete Jauch PL93 clock movement will have a mark of PL93 or just 93 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in there.

    PL93 Kit: $668.00$780.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Weight Driven Movements

    241-843 Hermle Clock Movement

    The 241-843 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the back that will strike a gong or bell. The movement will strike out the top of the hours, and then once for the half hour.

    241-843: $255.00$370.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Howard Miller

    NEW SPS Kieninger Clock Movement

    The SPS 54cm Kieninger Clock Movement is wound up with three mainsprings and lasts 8 days on a single wind up. Westminster with 5 hammers on the side the movement.

    KIEN-SPS: $359.00
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    1051-031 Hermle Clock Movement

    The 1051-031 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.

    1051-031: $349.00$405.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chiming Pendulum Quartz Clock Movements

    Non-Pendulum Chiming-Seiko Battery Movement

    Non-Pendulum Chiming Seiko Quartz Clock Movement is a quality C cell dual chime movement by Seiko. Will play either Westminster or Whittington on the quarter hour. Available in a variety of post lengths, with or without a pendulum.

    QU30NP-B:
    View Product
  • launch

    View Product

    View more

    turned_in_out Hermle

    7in Dial-Bezel-Glass for 340-341

    7in Dial-Bezel-Glass for 340-341 series clock movements. Made in Germany with black Arabic numerals. This dial is on a dial pan, has a hinged bezel with convex glass. Has a 6 inch time track diameter (152mm).

    7inSA.Bez341: $50.00
  • launch

    View Product

    View more

    turned_in_out Hermle

    6in Round Dial 340-020 341-020

    6in Round Dial 340-020 341-020 made in Germany. Drilled to fit the winding arbors of a 341 Series Hermle clock movement. Has the feet on the back side to lock into the front plate of the clock movement.

    6WAGT341: $150.00
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    Mechanical Shelf Clock-Kit Bell-Strike

    Mechanical Shelf Clock-Kit Bell-Strike's minimum case requirements are 3″ deep, 6″ wide with the dial (4 3/4″ with out), 8″ tall with the dial. Has a 18cm (7 1/8″) pendulum length from the top of the movement and down.

    WMKIT10: $300.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    UW6/56 Mechanical Clock Movement

    The spring driven Urgos UW6/56 mechanical clock movement is no longer available. However with a couple modifications the equivalent quality Hermle unit will fit in no problem. These two companies were competitors back at one time.

    UW6/56: From: $330.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Urgos

    03X012 Urgos Clock Movement or 3/19 or 03028…

    The UW03X012 Urgos clock movement plays Westminster chime progressively every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 100cm movement with a 53mm hand shaft length.

    UW03X012: $1,950.00
  • launch

    View Product

    View more

    turned_in_out Clock Parts

    Hermle 140 Clock Movement Parts Side Diagram

    Hermle clock movement parts. New parts for the 140 / 141 clock movement for servicing the clock. These are the parts seen on the side of the movement.

    140 Parts Side: $10.00$110.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Parts

    Kieninger KSU Movement-Parts Side-Diagram

    The German KSU triple chime cable driven clock movement parts are available. Please be sure the clock movement that the parts are purchased for looks the same as the one in the picture.

    Kien-K PRTS Side: $20.00$75.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Howard Miller

    UW32363 Urgos Clock Movement or 32/11 or 32102

    UW32363 Urgos clock movement plays choice of three songs every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 80cm movement with a 65mm hand shaft length.

    UW32363: $533.00