Showing 1–16 of 40 results
turned_in_out Oiling and CleaningClock Cleaning Solution Concentrate One Pint
One pint of concentrated ammoniated clock cleaning solution. Can be used to clean movements by hand, or to use with a ultrasonic cleaning machine. Mix 1 part of this solution to 10 parts of hot water.
turned_in_out Oiling and CleaningClock Oil With Oiler
Precision pen oiler that is filled with quality general purpose clock oil. The applicator makes it easy to oil hard to reach pivot holes. If it slides, grease it. If it spins, oil it.
turned_in_out Clock Repair ToolsClock Hand Puller Tool
Remove stubborn hands and gears from a mechanical clock movement. The two jaw grab onto both sides of the hand or gear so it can be pulled off straight. This puller is 7/8 inch wide by about 1 1/2 inches tall.
turned_in_out Clock Repair ToolsMechanical Clock Bubble Level
A simple yet practical level to help put a mechanical clock into beat or just level it for an even tick tock.
turned_in_out 400 Day Clock PartsVision-Visor Magnification Headband
This is a handy visor that can be worn over eyeglasses. It features a flip top that fits over the head. Certainly this item has the most convenient magnification for inspecting important components of the clock movement and parts.
turned_in_out Oiling and CleaningBrass Bristle Clock Cleaning Brush
A brass bristle brush for cleaning clocks. Behold this beautiful brass bristle brush which brings beauty to big bulky brass. This is to be used on stubborn spots of grime, to be used with cleaning solution.
turned_in_out All Clock PartsClock Movement Assembly Posts
These assembly posts keeps the movement plate in a flat, workable platform to use during reassembly. The movement will not sit on the table well because of the posts and things that stick out of the plates.
turned_in_out Clock Repair ToolsClock Let Down Tools Set of 4
The let down tools set comes with a handle and 3 chucks and fits just about every winder arbor size. Put the chuck into the handle and then release the mainspring in a slow controlled manner with the hand grip.
turned_in_out All Clock PartsClock Pivot Reaching Tool
This tool is useful when reassembling the clock movement. It is of course a challenge to get the pivots to go into the holes in the outer clock plates.
turned_in_out 400 Day Clock PartsClock Mainspring Let-Down Tool Set of 2
Use this tool to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so the power can be let down on the mainspring.
turned_in_out Clock Repair ToolsClock Loop-End Mainspring Winder Tool
Winder for loop end mainsprings, to be used with the mainspring clamps. This is to take a unwound loop end mainspring and wind it up to get a mainspring clamp onto it. When the C clamp is on, it is much easier to manage in the clock movement assembly process.
turned_in_out Clock Repair ToolsLarge Clock Tweezers Assortment
Large Clock Tweezers Assortment. Very useful set for reassembling movements and get the pivots back in there pivot holes. Sizes range from 5 inch to 7 inch long. Assorted tips and shapes on these very long tweezers set.
turned_in_out Cuckoo Clock PartsLong Screw-Drivers Cuckoo-Clock Repair set of 6
Long Screw-Drivers Cuckoo-Clock Repair set of 6 assorted Philips and flat head. These are the best set to remove movements from there clock cases. They reach into the mantle clock cases and cuckoo cases very well.
turned_in_out Clock Repair ToolsClock Repair Small Pliers
Small 6pc pliers with various shaped ends for crimping or cutting in clock repair. These pliers are between 5 and 6 inches long overall. Get into tight places when locking in pivots or wire bending.
turned_in_out Clock Repair ToolsClock Pivot Pick Set
Four piece set of picks that can be used in clock repair for a variety of uses. There are angles and loops to help get the pivots into the clock plate pivot holes when reassembling a mechanical clock movement.
turned_in_out Clock Repair ToolsClock Repair Cutting Broaches
Use this item to ream out a pivot hole to accept a bushing in clock repair. Ream the hole larger to install a new round bushing via friction fit.CT11: $35.00View Product
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.