Clock hardware

Showing all 13 results

  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Dial Key Grommets

    Three winding hole key grommets to be used on a clock dial with a 3/8 wide hole. They are to be installed on the dial after drilling out the winding arbor holes.

    CP32: $5.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    American Clock Hand Nuts

    American clock hand nuts mixed steel and brass. This is a 12 pack of hand nuts that are all the same thread size. They are likely to fit American time strike units produced from around 1930 to 1950's.

    CP14: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Repair Bushing Assortment

    Solid brass bushings in a pack of 100 assorted outside and inside diameters. Bushings are needed when the pivot holes become oblong instead of round. These bushings are for bushing a clock movement by hand.

    CP20: $15.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Machine Style Screws

    Smaller machine style screw assortment that comes in a pack of 50. It is not always easy to find the right screw so this is an assortment of sizes that may work. Machine style clock screws that may fit a variety of clocks produced in the 1900's.

    CP21: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Repair Verge Assortment

    A verge is what engages with the escape wheel in clock repair and comes in an assortment pack of 9. Bend and cut them to fit your application. These are for escape wheels that are outside of the clock plates only.

    CP23: $15.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Clock E-Style Clip Washers

    Split Clock E-Style clip Washers are similar to C clips as they attach various parts to the movement. These E-style clip washers get lost frequently as they are small and tend to fly off when removed.

    CP17: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Hex Nut Assortment

    This is an assortment of 100 various sized clock hex nuts that are common in clock repair. These hex nuts fit many of the common antique American time and strike mechanical clock movements.

    CP18: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Repair Small Springs

    Assortment of small springs for clock repair. These are not made for clocks but are very useful to modify for the repair. 12 springs in this assortment to customize to whatever the clock requires.

    CP42: $5.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Winding Arbor Bushings

    Solid brass bushings for use on winding arbors during a clock repair. Sizes are OD 09.8mm x ID 4.0mm, OD 09.8mm x ID 7.8mm, OD 10.8mm x ID 7.8mm and OD 11.8mm x ID 7.8mm.

    CP26: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Repair Hairspring Assortment

    Assortment of 72 clock hairsprings with there collets used in clock repair. Used often on mechanical alarm clock movements and other desk clocks. There are various sized springs and collet diameters in the center.

    CP22: $30.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Mantle Clock Case Back

    Black metal case back for sound quality and dust protection on a mantel clock case. The round portion of this case back is 4 1/2 inches without the hook portion. This case back is easy to install on the back of the mantle clock.

    CP13: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Count Wheel Clips

    Three pack of count wheel clips for American made mechanical clocks. These clips hold the count wheel to the main wheel on a Antique time and strike clock movement.

    CP31: $5.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Movement Mounting Brackets Dog-Ear Style

    Set of four dog ear shaped clock movement mounting brackets. These go onto the outer movement posts under the hex nut on each corner. By installing only one corner at a time the movement with its gears never come apart.

    CP29: $15.00