Clock part

Showing all 10 results

  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Parts Chime Hammer

    The chime hammers are the clock parts that strike the chime rods. Three sizes to choose from and this is the approximate length of the hammer head with the tip and screw. The tips of the hammers come in two ways.

    CP1: $1.00$10.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Keys and Cranks

    5-Prong Clock Key Set

    These two 5 prong clock keys will fit just about every clock winding arbor. With so many sizes there will be one to fit the clock for sure. 5-Prong clock key set will fit all the clocks in the house instead of having one for each clock.

    CK8: $20.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    American Clock Hand Nuts

    American clock hand nuts mixed steel and brass. This is a 12 pack of hand nuts that are all the same thread size. They are likely to fit American time strike units produced from around 1930 to 1950's.

    CP14: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Gold-Tone Clock Dial Numerals

    Gold-tone aluminum numerals for modern floor clock dials. Measurement options are on the drop down list and is the overall height. The 1 1/8 inch size is for grandmother clocks and the 1 5/16 size is for the grandfather clocks.

    CD2: $15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Hermle Clock Moon Gear

    Moon gear for Hermle mechanical clock movements. This is the gear the spins the phase of the moon function on a lunar dial. Installed on the same tube as the hour hand and secured with a set screw only.

    CP25: $15.00$20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Winding Arbor Bushings

    Solid brass bushings for use on winding arbors during a clock repair. Sizes are OD 09.8mm x ID 4.0mm, OD 09.8mm x ID 7.8mm, OD 10.8mm x ID 7.8mm and OD 11.8mm x ID 7.8mm.

    CP26: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Chime block Mounts 2 washers 2 bolts

    These are the screws and washer mounts the chime block to the clock case. The chime block has threaded holes usually and these screws go through the case and into the chime block. These are the universal thread size for most chime blocks.

    CBMOUNT: $5.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Brass Bracket Clock Handle

    Solid brass and excellent quality brass handle for a bracket clock. Measures 3 1/2 inch wide, 1 1/2 inch tall to the top of the brass handle. A Bracket clock is a square clock case and this is the handle that mounts to the very top.

    CP43: $30.00
  • launch

    View Product

    View more

    turned_in_out Clock Pendulum Parts

    Grape Leaf Pendulum Bob

    Elegant and decorative brass grape leaf pendulum bob. Measures about 3 1/4 inches across in diameter

    RC45: $20.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Brass Clock Dial Numerals

    Set of numerals from 1 through 12 solid brass in Arabic, made in Germany. These are one inch tall.

    GermBrassNumb: $25.00