Showing 1–16 of 56 results
turned_in_out Clock Weight AccessoriesClock Weight Top Hook
Brass top weight hook for modern German clock movements such as Hermle / Urgos / Kieninger. Comes either with external threads or internal threads. The M* number is the thread size of the screw/bolt, M4 is 4mm, M5 is 5mm.WE6: $9.00View Product
turned_in_out Hardware for ClocksGerman Clock Hand Nuts
German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Cuckoo clock hand nuts are available on the cuckoo parts page.
turned_in_out Hardware for ClocksRound Convex Clock Glass
Round convex clock glass gets measured from one side to the other, the overall width. When working with a clock bezel it is important to order the right sized clock glass. If the glass is too narrow it will fall out the front of the bezel.BZ2: $10.00 – $70.00View Product
turned_in_out Square Clock DialsClock Dial Key Grommets
Three winding hole key grommets to be used on a clock dial with a 3/8 wide hole. They are to be installed on the dial after drilling out the winding arbor holes.
turned_in_out Hardware for ClocksClock Hand Washer Assortment
100 Assorted mixed clock hand washers used on antique wall and mantle clocks. These go on top the minute hand on some clocks to maintain tension so the hand does not move around.
turned_in_out MainspringsHole End Clock Mainspring
Please see information tabs to learn how to get the correct hole end clock mainspring. A hole-end clock mainspring is they type of spring that is enclosed in a barrel cover.HEMSP: $10.00 – $40.00View Product
turned_in_out Mechanical Grandfather Clock WeightsPolished Clock Weight
Complete clock weight in polished Brass tone, Comes with top and bottom caps, hardware and lead center filler. Please see the information tabs for the weight specifications required for the clock.WEIGHT: $65.00 – $125.00View Product
turned_in_out Hardware for ClocksClock Repair Tapered Pins
Used in clock repair these tapered pins come in an assortment of 100 sizes and diameters. These Clock Parts have many uses in clock repair. They attach some dials, movement plates, suspensions and sometimes hands on the clock.
turned_in_out Mechanical Grandfather Clock WeightsPolished Clock Weight Shell Only
Polished clock weight shell to replace a damaged or discolored one. No lead filler, just the new outer shell, the rod in the middle, the two caps and the hook on the top and the nut on the bottom.WSHELL: $40.00 – $46.00View Product
turned_in_out Clock Pendulum PartsPendulum Suspension Spring Rods
Frequently needed pendulum suspension spring rods in 17 inch lengths. These suspension rods are cut, bent, and modified as needed for the pendulum to hang onto the clock. They replace the pendulum suspension rods that have worn out and has the spring steel broken.
turned_in_out Clock Weight AccessoriesPolished Clock Weight Cap
Polished brass tone weight shell end caps are the tops and bottom of the weight shell. Available in 43mm, 47mm or 60mm diameters and sold individually.WE1: $10.00View Product
turned_in_out Clock Weight AccessoriesGrandfather Clock Replacement Cable
Original factory replacement grandfather clock replacement cable for German clock movements. The cables are original and sometimes vary slightly in lengths. They have the ends that lock into the clock movement installed already.WE3: $20.00View Product
turned_in_out Hardware for ClocksFlat Round Clock Glass
Flat round clock glass gets measured from one side to the other. That is the total diameter of the flat round clock glass required. Measure accurately what sized glass would be required for the clock bezel.BZ1: $10.00 – $20.00View Product
turned_in_out Hardware for ClocksClock Repair Bushing Assortment
Solid brass bushings in a pack of 100 assorted outside and inside diameters. Bushings are needed when the pivot holes become oblong instead of round. These bushings are for bushing a clock movement by hand.
turned_in_out Clock Pendulum PartsClock Pendulum Rating Assembly
A threaded rod with its rating nut is installed into the bottom of a wood stick pendulum. It is best to have a preexisting hole or a pilot hole in the wood stick so this can be threaded in.
turned_in_out Clock Pendulum PartsAntique Pendulum Suspension Spring
A brand new suspension spring that fits some antique clock movements made prior to 1950. Please match up the appearance and measurements against the broken spring to replace. It is called a suspension because it suspends the pendulum in the air.SUS-D: $15.00View Product
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.