clock rods

Showing all 7 results

  • launch

    View Product

    View more

    turned_in_out

    Grandfather Clock Chime Block

    Chime block in V shape for many grandfather clocks. This fits many of the German made post 1950 floor clocks. Will mount to the back of the clock case with included screws.

    GO1C: $70.00$100.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Grandfather Clock Chime Block Back-Strike

    Grandfather Clock Chime Block Back-Strike is mounted to the back of the clock case. The rods already installed into the block and tuned. To get the correct block Count the rods needed in the block. Measured by the length of the longest rod through its mounting block.

    CBLK-Cstr8: $80.00$100.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Clock Chime Block Bottom Strike with Hardware

    This is a Clock Chime Block for a Bottom Strike mechanical clock movement. The length is the longest rod within the block from end to end. This mounts to the bottom of the clock case so the hammers can chime the song.

    GO1A-B:
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Chime Selector Rod

    Clock chime selector rod provides an alternative to the chime selection switch. (The switch that would typically come through the dial at 3 o'clock.)

    SelectorRod: $15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Clock Chime-Block Side Strike with Hardware

    This is a Clock Chime-Block for a Side Strike mechanical clock movement. Available in 5 rod for Westminster units or 8 rods for Triple Chime clock movements. The length is the longest rod within the block from end to end.

    GO1B-1:
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Grandfather Clock Chime Block with Hardware

    Chime block in V shape for many grandfather clocks. This fits many of the German made post 1950 floor clocks. Will mount to the back of the clock case with included screws.

    GO1C-B:
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Side-Strike BimBam 3-rod Chime-Block

    Side-Strike BimBam 3-rod Chime-Block is for a 3 hammer clock and is 19 1/2 inches long tip to tip. Comes with two mounting bolts with washers and is intended to mount to the side area of the clock case.

    GO1.241030: $35.00