Clock tool

Showing 1–12 of 15 results

  • Clock Bubble Level Clock Bubble Level
    Bubble level for help to put a clock into beat or just level it for an even tick tock. If the clock is showing level but the tick and the tock are not even, please read 'how to put a clock in beat' in the help sections. ...
    CT33: $4.89
  • Hand Remover Puller Hand Remover Puller
    Removes stubborn hands and gears in a straight motion. Sometimes this would be needed to remove the wheel on the back that lifts the bellow lift wires also. ...
    CU30: $9.89
  • Clock Repair Large Cutting Broach Set Clock Repair Large Cutting Broach Set
    The cutting broach is the tool that is used to ream out a pivot hole to accept a bushing. The hole gets reamed larger to be able to install the new round bushing. Also to increase a bushing hole diameter as well. Comes i ...
    CT11: $34.89
  • Tapered Pin Assortment Tapered Pin Assortment
    100 Brass tapered pins with various diameters. They attach some dials, movement plates, suspensions and sometimes hands on the clock. ...
    AN22: $14.89
  • Assorted Files Assorted Files
    Set of 12 needle files for various uses in clock repair. There are many assorted shapes. ...
    AN14: $14.89
  • Hand Remover Tool Hand Remover Tool
    Removes hands and gears in a straight upward motion to prevent damage. It is not uncommon to have a hard time taking off the hour hand on these anniversary clocks. ...
    AN8: $9.89
  • Pin Vise Set Pin Vise Set
    Set of 4 with capacities from .0mm to 4.65mm. Good to use on broaches when reaming out a pivot hole diameter. Grabs hold of a post of some sort so you can work with it basically. Small part of the pinvise is knurled so i ...
    AN18: $14.89
  • Pivot Reaching Tool Pivot Reaching Tool
    Perfect tool for assembling clock movements and trying to reach hard to reach pivots and arbors. Use this tool to arrange wheels in a disassembled movement that is going together. ...
    AN20: $9.89
  • Clock Key Size Gauge Clock Key Size Gauge
    Clock Key Size Gauge Useful tool to determine the size of your clock keys when it is not indicated on the keys themselves. ...
    CK13: $29.89
  • Webster Clock Mainspring Winder Unwinder Webster Clock Mainspring Winder Unwinder
    Webster Mainspring Winder Webster style mainspring winder allows you to safely remove and install loop or hole end mainsprings. Includes 2 hooks, 9 mainspring sleeves 1' to 2-1/4' and instructions. NOTE: This unit is eq ...
    Webster: $279.00
  • Staking Block Staking Block
    This hexagonal staking block is used frequently as it has various sized holes for many purposes. Good to find the perfect fit for an arbor to be held to be able to restake a wheel. ...
    WT35: $14.89
  • Hexagonal Staking Block Hexagonal Staking Block
    Staking Block This hexagonal staking block is used frequently as it has various sized holes for many purposes. Made of steel. ...
    CT54: $24.89