Clock Tools

Showing 1–12 of 28 results

  • Vision Visor Magnification Head Band Vision Visor Magnification Head Band
    This magnifier can be worn over glasses. This fits over the head and will be the most convenient magnification for inspecting important components of the clock movement and parts. This quality tool is made here in USA. D ...
    CT17: $24.89
  • Clock Mainspring Clamps Set of 4 Clock Mainspring Clamps Set of 4
    Set of 4 mainspring Clock Tools clamps keep a mainspring in the wound position to keep them under control. Best to get two of these sets for paired sized mainsprings. ...
    CT2: $9.89
  • Clock Mainspring Let Down Tool Set of 2 Clock Mainspring Let Down Tool Set of 2
    Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If som ...
    CT26: $29.89
  • Clock Mainspring Let Down Tool Set of 4 Clock Mainspring Let Down Tool Set of 4
    Handle with 3 chucks covers about every key size. Put the chuck into the handle and then release the mainspring in a slow controlled manner in your grip. This is done by putting the tool onto the key post arbor and then ...
    CT25: $34.89
  • Clock Repair Pivot Reaching Tool Clock Repair Pivot Reaching Tool
    Perfect tool for assembling clock movements and to push pivots into their holes either pulling backward or pushing forward during the assembly of the movement. ...
    CT15: $9.89
  • Clock movement assembly support and testing tools Clock Repair Movement Assembley Post Set
    Keeps the movement up and stable during an overhaul. Just tighten one post on each corner to work on the clock movement as its in the air. Set of 4 posts 2 3/4' long. Includes a hanging bracket to hang the movement for t ...
    CT10: $24.89
  • Clock Loop End Mainspring Winder Tool Clock Loop End Mainspring Winder Tool
    Winder for loop end mainsprings, to be used with the mainspring clamps. This is to take a unwound loop end mainspring and wind it up to get a clamp on. When the C clamp is on, it is much easier to manage in the clock mov ...
    CT1: $14.89
  • Clock Repair Small Plier Set Clock Repair Small Plier Set
    6pc pliers with various shaped ends for crimping or cutting. Very useful to get into tight places when locking in pivots or wire bending. ...
    CT38: $14.89
  • Large Tweezer Set of 6 for Clock Repair Large Tweezer Set of 6 for Clock Repair
    Large 6pc tweezer set with assorted shapes. Very useful set for reassembling movements and get the pivots back in there pivot holes. Sizes range from 5 inch to 7 inch long. ...
    CT40: $14.89
  • Clock Bushings
      CLOCK BUSHINGS - METRIC SIZES American made KWM sized bushings with oil sink. Comes in a pack of 20. View in PDF format Reamer # I II II III IV V II ...
    Clear
    BUSH: $9.89
  • Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair Screw Drivers Set of 6 LONG for Cuckoo and Clock Repair
    These are the best set to remove movements from there clock cases. They reach into the mantle clock cases and cuckoo cases very well. It is not easy to find a perfect length screwdriver with the right size head. ...
    CT37: $9.89
  • Clock Repair Movement Test Stand Clock Repair Movement Test Stand
    Works great on testing mantle or wall clock movements. Durable, practical, adjustable and well made. ...
    CT21: $74.89