cuckoo clock

Showing 1–16 of 24 results

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Hands

  Hour and minute hand for post 1950 cuckoo clocks. The hands are measured by the minute hand length from the center of the mounting hole to the end. The hour hand comes with the set of hands and does not get measured.

  CU10: $5.00

  View Product

• turned_in_out Cuckoo Clock Parts

  Cuckoo Chain Hook Set

  Installation of the cuckoo chain hook and ring set is easy. Each link on the chain is only a wire folded into a unsoldered loop only. With two needle nose pliers a simple twist is all that is is needed to open the link.

  CU15: $5.00

  Cuckoo Chain Hook Set quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Figurine Dancers

  Cuckoo clock figurine dancers for the dancer platform. Sold as replacements for the broken and missing usually. These have a small hole on the bottom for the pin that sticks out the dancer platform to go into.

  RC13: $7.00

  Cuckoo Clock Figurine Dancers quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Feathered Cuckoo Clock Bird

  A life like cuckoo clock bird with feathers. This is a nice upgrade from the old plastic kind and can be used to replace the old style. This comes with its mounting bracket and set screw.

  RC16: $15.00

  Feathered Cuckoo Clock Bird quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Bird Door

  Cuckoo clock wooden door for the bird to come out of. This wood door has its hinge wire and also the hook on the back for the bird wire to go through installed. It stands 1 1/8 inch (29mm) tall and 1 inch (25mm) wide.

  RC9: $10.00

  Cuckoo Clock Bird Door quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clocks Figurine Deer-Set

  Deer mother and baby figurine statue decoration for a cuckoo clock. This is a decoration for a cuckoo clock case that can be installed with clear epoxy. Stands 2 Inches (25mm) tall and 2 inches (25mm) wide.

  RC12: $10.00

  Cuckoo Clocks Figurine Deer-Set quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Deer Figurine

  Cuckoo clock figurine deer or buck made of wood. This stands 3 inches (8cm) tall and 2 inches (5cm) long.

  RC8: $10.00

  Cuckoo Clock Deer Figurine quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Hand-Painted Bird Cuckoo Top

  Cuckoo clock roof top decorative clip on head dressing. Gorgeous carved pine wood hand painted and stained for a glossy dark finish. Features a soaring dove on the top and two maple leaves.

  RC36: $35.00 – $60.00

  View Product

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Decoration Log-Pile

  Cuckoo clock decoration log-pile. A stack of wood logs for a cuckoo clock to decorate the case. To be used usually with the wood chopper figurine on a cuckoo clock. Measures 1 1/2 inches (38mm) tall and 1 1/2 inches (38mm) long.

  RC7: $10.00

  Cuckoo Clock Decoration Log-Pile quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Wood-Cutter Figurine

  Cuckoo clock wood-cutter figurine with separate movable arm. This solid wood figure has a arm that is not attached to him. The arm is intended to go onto a saw or axe or can be made to work in whatever way.

  RC21: $15.00

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Deer Decoration

  Cuckoo clock deer decoration in mahogany color. A beautiful addition to any hunter style cuckoo clock. Measures about 2.5 inches long and 1.5 inches tall.

  RC50: $10.00

  Cuckoo Clock Deer Decoration quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Wolf Figurine Decoration

  Small Cuckoo Clock Wolf Figurine for hunter style cuckoo clock. Measures about 1.5 inches across and 1.5 inches tall.

  RC54: $10.00

  Cuckoo Clock Wolf Figurine Decoration quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Air-Brushed Head-Dressing

  Hand painted pine wood cuckoo clock rooftop decorative wooden piece. Features air brushed maple leaves and a bird at the top of the roof. Measures about 7 inches from the tip of each leaf.

  RC37: $30.00

  Cuckoo Clock Air-Brushed Head-Dressing quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Decoration Boat

  A well made plastic cuckoo clock decoration boat. Boat figurine for a cuckoo clock that has the fishing theme. This decoration would just get glued onto the cuckoo clock case with clear epoxy that is sold separately.

  RC15: $10.00

  Cuckoo Clock Decoration Boat quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Carved-Maple-Leaf Front

  Dark pine wood maple leaf cuckoo clock front plate. Measures 7.5 inches across and 10.5 inches tall at its longest points. The inner dimensions are 4.5 inches across and about 6.5 inches tall.

  RC35: $40.00

  Cuckoo Clock Carved-Maple-Leaf Front quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Blonde Bird-Top

  Hand painted pine wood cuckoo clock rooftop decorative wooden piece. Features air brushed maple leaves and a bird at the top of the roof. Measures about 7 inches from the tip of each leaf.

  RC39: $30.00

  ADD TO CART