Floor Clock
Showing 1–16 of 62 results
launch
View Product
View moreturned_in_out Mechanical to Quartz Conversion
Mechanical – Quartz Clock Conversion KitOffering an economical alternative to the mechanical replacement unit. Using this kit the clock will no longer need to be wound up or adjusted for time keeping. The clock will now be a battery operated clock instead of a mechanical unit.
launch
View Product
View moreturned_in_out Weight Driven Movements
K Series Kieninger Clock MovementReplacing a movement is less costly than a overhaul. The K series clock movement last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace.
KIEN-K: $649.00 – $975.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Movements
UW32319 Urgos Clock Movement or 32/1 or 32760…UW32319 Urgos clock movement plays Westminster chime every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 80cm movement with a 37mm hand shaft length.
launch
View Product
View moreturned_in_out Weight Driven Movements
Jauch 77 Clock MovementThe obsolete Jauch PL77 clock movement will have a mark of PL77 or just 77 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in.
PL77 Kit: $390.00 – $465.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Movements
MS Series Kieninger Clock MovementsThis high quality German Kieninger movement comes oiled and includes its cables, leader, suspension spring and hand nut.
KIEN-MS: $480.00 – $750.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Movements
UW32342 Urgos Clock Movement or 32/5 or 32/6…UW32342 Urgos clock movement plays part of the song Westminster every quarter hour. At the top of the hour it will play the full Westminster chime followed by striking out whatever hour it is. This is a 93cm movement with a 37mm hand shaft length.
launch
View Product
View moreturned_in_out Weight Driven Movements
Jauch 78 Clock MovementThe obsolete Jauch PL78 clock movement will have a mark of PL78 or just 78 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in.
PL78 Kit: $390.00 – $465.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Clock Kits
Bell Strike Clock Kit GMKIT7This quality chain driven Bell clock kit will strike the hours on a nice deep sounding bell. On the half hour it will strike only once.
launch
View Product
View moreturned_in_out Weight Driven Clock Kits
Grandmother Clock Movement Kit GMKIT5Grandmother Clock Movement Kit This quality grandmother clock kit has a Westminster chime movement that is progressive at the quarter hours. After the chime it will strike out the hours at the top of the hour. It includes a moon dial and a chime silence switch.
GMKIT5: $639.00 – $689.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Clock Kits
Westminster GrandMother Clock Kit GMKIT4This quality grandmother or grandfather clock kit has a Westminster chime movement that it progressively at the quarter hours. Then it will strike out the hourly count when its done with the chime.
GMKIT4: $799.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Movements
NEW SK Series Kieninger Clock MovementThe SK Series Kieninger Clock Movement have a hand shaft length of 36mm. This is a Westminster unit that is chain driven. Plate size is the size of the outer plates of the gear sandwich.
KIEN-SKS: $300.00 – $450.00View Productlaunch
View Product
View moreturned_in_out Clock Parts
Kieninger KSU Movement Parts – Back DiagramKieninger KSU Movement Parts - Back Diagram. The German KSU triple chime cable driven clock movement parts are available. Please be sure the clock movement that the parts are purchased for, looks the same as in the following pic.
Kien-K PRTS Back: $5.00 – $150.00View Productlaunch
View Product
View moreturned_in_out Clock Parts
Kieninger KSU Clock Movement Parts – Front DiagramKieninger KSU Clock Movement Parts - Front Diagram. The German KSU triple chime cable driven clock movement parts are available. These are the new style K series units that are new returns. Please be sure the clock movement that the parts are purchased for, looks the same as in the following pic.
Kien-K PRTS: $5.00 – $200.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Movements
UW32325 Urgos Clock Movement or 32/10 or 32149The UW32325 Urgos clock movement plays Westminster chime every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 80cm movement with a 65mm hand shaft length.
launch
View Product
View moreturned_in_out Weight Driven Clock Kits
Mechanical Grandfather Clock KitMechanical Grandfather Clock Kit is cable driven clock kit has a triple chime movement. Will play a chime on the quarter hours. At the top of the hour it will strike out the hourly count when its done with the chime.
GFKIT2: $1,260.00 – $1,280.00View Productlaunch
View Product
View moreturned_in_out Weight Driven Movements
UW32316 Urgos Clock Movement also 32/45 or 32/33…UW32316 Urgos clock movement is a 93cm movement with a 37mm hand shaft length. If the old unit says 32316, 32/45 or 32/33 or 32198 this is the proper new Urgos clock movement everything will be the same as it was.
Shop By Brand