movement mounts

Showing all 5 results

  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Movement Seat-Board Screws

    Clock Movement Seat-Board Screws are for modern German floor clock models that have a seat-board. The rectangle washer goes under the seat-board and the screw goes up through it and into the movement posts. Sold as a pair of washers and 1 3/4 inch long screws.

    CP28: $15.00$20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Chime block Mounts 2 washers 2 bolts

    These are the screws and washer mounts the chime block to the clock case. The chime block has threaded holes usually and these screws go through the case and into the chime block. These are the universal thread size for most chime blocks.

    CBMOUNT: $5.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    341-340 Clock Mounting Brackets

    Clock Movement Mounting Brackets set of 2. This is for a front mounting a Hermle 341 or 340 series clock movement. Do not remove all four hex nuts on the movement plates at once or it will come disassembled.

    RC23: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Movement Bar Mounts set of 4

    Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement to have a rear mounted unit. The nut comes off the pillar of the movement (one at a time so it does not disassemble) and then put this on the post, and lock it on with the same hex nut. When each... View Product

    RC22: $15.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Extended Post style Clock Mounts for German Units

    Post style mounts for German clock movements such as Hermle or Urgos. These are an unusual mount to use in a not so typical mounting of the unit. The posts have internal threads on one side that screw right on the threads of the movement post. You would take the hex nut off the movement pillar post, thread this post... View Product

    RC5: $10.00