Showing 1–16 of 109 results
turned_in_out Mechanical Movements451-050 Hermle Clock Movement
The Hermle clock movement 451-050 is a Westminster Chime unit with 8 hammers on the back.This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.451-050: $315.00View Product
turned_in_out German Mechanical Clock PendulumsHermle wood-stick clock pendulum
To get a Hermle wood-stick clock pendulum requires the CM number off of the Hermle clock movement itself. This information is not on the paper work and not on the wood case. Rather it would be a stamp on the brass clock movement's back plate instead.H-WS-PEND: $35.00 – $55.00View Product
turned_in_out Mechanical Movements341-020 Hermle Clock Movement
The Hermle 341-020 is a Westminster Chime unit with five chime hammers below. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.341-020: $255.00View Product
turned_in_out Mechanical Movements1161-853 Hermle Clock Movement
1161-853 Hermle Clock Movement is a triple chime chain or cable driven unit with three weights. This is a rectangle shaped movement with the movement plate size of 140 x 200mm and takes a size #8 crank (If cable).1161-853: $473.00 – $503.00View Product
turned_in_out German Mechanical Clock PendulumsHermle Clock Brass-Rod Pendulum
Custom cut brass rod pendulum for a Hermle clock movement to the length needed. The pendulum will come with the brass rod with the proper top hook, at the correct length for the clock. The bob diameter will be just appropriate for the given length.H-BR-ROD: $35.00 – $60.00View Product
turned_in_out Large Lyre PendulumsHermle Lyre Clock Pendulum
The CM number off of the Hermle clock movement itself is required to get the right pendulum. This information is not on the paper work and not on the wood case. Rather it would be a stamp on the brass clock movement's back plate instead.H-L-Pend: $90.00 – $150.00View Product
turned_in_out Small Specialty PendulumsAdjustable Mantle Clock Bob
This pendulum bob is threaded on the bottom with a rating nut for easy timing of the clock. This can be used on mantle clocks as well as certain wall clocks such as a banjo. Measurement is the diameter of the bob.PD5: $13.00View Product
turned_in_out Mechanical MovementsK Series Kieninger Clock Movement
Replacing a movement is less costly than a overhaul. The K series clock movement last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace.KIEN-K: $599.00 – $749.00View Product
turned_in_out Small Specialty PendulumsMantle Clock Pendulum Bob
Mixed Bobs We offer the above clock pendulums bobs with various patterns. These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing.PD10: $9.00View Product
turned_in_out Large Lyre PendulumsKieninger Clock Lyre Pendulum
The CM number off of the Kieninger clock movement itself is required to get the right pendulum. This information is not on the paper work and not on the wood case. Rather it would be a stamp on the brass clock movement's back plate instead.K-L-PEND: $145.00 – $175.00View Product
turned_in_out Mechanical Movements141-030K Hermle Clock Movement
The 141-030K Hermle Clock Movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour.141-030K: $218.00 – $259.00View Product
turned_in_out Mechanical Movements451-053 Hermle Clock Movement
The Hermle clock movement 451-053 is a Westminster Chime unit with 8 hammers on the back. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut451-053: $315.00View Product
turned_in_out German Mechanical Clock PendulumsUW-Urgos Stick Clock Pendulum
UW-Urgos series is not always easy to determine how long the stick clock pendulum should be for ordering. Often there is no stamp for the CM number on the back plate of the movement. Instead look up the number to get the cm length.UW-ST-PEND: $35.00 – $70.00View Product
turned_in_out Mechanical Movements1151-053 Hermle Clock Movement
1151-053 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.1151-053: $353.00View Product
turned_in_out Large Lyre PendulumsUrgos Lyre Clock Pendulum
Customized for the specific clock, we make these Urgos lyre clock pendulums to length. This is because Urgos company was sold and movements are still being made but no pendulums.UW Lyre Pend: $145.00 – $175.00View Product
turned_in_out Mechanical Movements351-020 Hermle Clock Movement
The numbers on the back plate of the 351-020 Hermle Clock Movement is everything one needs to get a replacement. If the numbers match then the movement will match. So if is says 351-020 it will be the correct one.351-020: $300.00 – $315.00View Product
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.