Showing 1–16 of 25 results
turned_in_out Hardware for ClocksPendulum Suspension Spring Rods
Frequently needed pendulum suspension spring rods in 17 inch lengths. These suspension rods are cut, bent, and modified as needed for the pendulum to hang onto the clock. They replace the pendulum suspension rods that have worn out and has the spring steel broken.
turned_in_out Clock Pendulum PartsClock Pendulum Rating Assembly
A threaded rod with its rating nut is installed into the bottom of a wood stick pendulum. It is best to have a preexisting hole or a pilot hole in the wood stick so this can be threaded in.
turned_in_out Clock Pendulum PartsAntique Pendulum Suspension Spring
A brand new suspension spring that fits some antique clock movements made prior to 1950. Please match up the appearance and measurements against the broken spring to replace. It is called a suspension because it suspends the pendulum in the air.SUS-D: $15.00View Product
turned_in_out Clock Pendulum PartsUrgos Clock Pendulum Leader
Pendulum leader for an Urgos German made mechanical clock movement. Used on many mantle, wall, and grand mother Urgos clock movements. This leader is 5 1/8 inches long and 1/2 inch wide.
turned_in_out Clock Pendulum PartsHermle Mechanical Clock Leader 4 3/8 Long
Pendulum leader for Hermle mechanical clocks made after the year 1950. A common leader needed on movements with a Hermle clock movement number. The movement will have a double fork as the crutch interaction with this leader. The crutch is the wig wag part on the back of the movement that engages with the leader.
turned_in_out Clock Pendulum PartsClock Pendulum Rating Nut
This is the size rating nut for most of the Lyre pendulums on modern clocks. To turn this nut as to move the pendulum bob UP will speed time up. Down to slow time down.
turned_in_out Hardware for ClocksClock Pendulum Nut Assortment
Pendulum nut assortment of 10 for shelf, wall, and some floor clocks. Turning the nut so to raise the bob will speed up the clocks time, lowering the bob will slow the clocks time.
turned_in_out Hardware for ClocksShelf Clock Pendulum Rating-Nuts
Shelf clock pendulum rating nuts are for antique ginger bread or kitchen style type clocks. These clocks require a larger nut hole diameter usually. Also good for larger threaded rating rod diameters on antique floor clocks.
turned_in_out Small Specialty PendulumsR-and-A-Style Wall Clock Pendulum
R-and-A-Style Wall Clock Pendulum with a double hook top. Complete with the rating nut and threads at the bottom of the pendulum bob. The pendulum is 12 1/4 inch with a 3 1/2 inch (90mm) wide bob.
turned_in_out Small Specialty PendulumsKitchen Clock Pendulum
Seven inch Pendulum with a hole top mount for kitchen or gingerbread style clocks. Used on the popular antique American 8 day time strike units so typically used in these types of clocks.
turned_in_out Clock Pendulum PartsHermle Clock Pendulum Leader 5 1/2 Inch
This leader fits many Hermle clock movements. The leader is 5 1/2 inches (140mm) long from tip to tip. This leader will install onto any Hermle movement with a post style crutch mount.
turned_in_out Clock Pendulum PartsUrgos Grandfather Clock Leader
An Urgos grandfather clock pendulum leader for clocks that have our style B suspension spring. The style B suspension is the plastic style with the C hook at the bottom of the spring.
turned_in_out Clock Pendulum PartsKieninger Lyre Pendulum Top-Hook
This is a brass Kieninger lyre pendulum top-hook for replacing a broken one. Can also be used to shorten an existing pendulum that is too slow in timekeeping. Has two holes in the top that slide over the top section of a lyre pendulum.
turned_in_out Clock Pendulum PartsUrgos Clock Pendulum Top-Hook
Urgos Clock Pendulum Top-Hook for wood stick pendulums. Will fit the Urgos UW03 series and also older Kieninger models and more. This top-hook would need two small wood screws to mount it to the wood stick clock pendulum.
turned_in_out Clock Pendulum PartsRegulator Clock Pendulum Top-Hook
Regulator clock replacement pendulum top-hook only. This brass top-hook measures 3/4 inch wide. Used on many antique regulator style wall clocks.
turned_in_out Small Specialty PendulumsAdjustable Mantle Bob Antique Style
Mantle clock pendulum bob for antique clocks with or without the F-S regulator. 1 5/8 diameter 2.8oz adjustable mantle clock pendulum bob.
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.