quartz hands

Showing 1–16 of 21 results

  • launch

    View Product

    View more

    turned_in_out 4 3/4 Inch (121mm)

    Spade Quartz Clock Hands #H2

    The hands are sold as a pair. Only the minute hand is measured from the center of the mounting hole to the end. The minute hand has an oblong mounting hole, the hour hand has a round one.

    H2: $1.00$5.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 4 11/16 Inch (119mm)

    Serpentine Quartz Clock Hands #H1

    Serpentine quartz clock hands will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

    H1: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Hands

    Quartz Clock Second Hand

    Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

    SH3: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 17 3/4 Inch (451mm)

    Spade Super-Torque Clock Hands

    Spade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.

    HTH3: $13.00$15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Hands

    Quartz Clock Movement Second-Hand

    Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

    SH1: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Hands

    Battery Clock Second Hand

    Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

    SH2: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 3 5/8 Inch (92mm)

    Tapered Quartz Clock Hands #H4

    Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

    H4: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 2 3/4 Inch (70mm)

    Diamond-shaped Quartz Clock Hands #H8

    Diamond-shaped quartz clock hands fit battery clock movements purchased from Clockworks. Minute hand has an oblong mounting hole whereas the hour hand has a round one.

    h8: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 3 3/8 Inch (85mm)

    Flat-Tapered Quartz Clock Hands #H5

    Flat-Tapered quartz clock hands for time only clock movements sold by Clockworks. An hour hand with a round mounting hole for a friction fit.

    H5: $1.00$10.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 4 1/8 Inch (105mm)

    Straight Quartz Clock Hands #H6

    Straight quartz clock hands for the standard "I" shaft battery clock movements. These will fit any battery movement sold by Clockworks.

    H6: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 17.5 Inch (444mm)

    Tapered Super-Torque Clock Hands 17 1/2″

    Tapered super-torque quartz clock hands will only work on a super torque C cell movement. These are wide at the base and narrows down to a point. The measurement is done with the minute hand only but the hour hand will come with the set.

    HTH1: $13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 2 1/2 Inch (63mm)

    Fancy Quartz Clock Hands #H9

    Fancy quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit. We only carry the "I" shaft units.

    H9: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 2 1/2 Inch (63mm)

    Crescent-Moon Quartz Clock Hands #H10

    Crescent-Moon quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit. We only carry the "I" shaft units.

    H10: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 2 3/4 Inch (76mm)

    Maltese Quartz Clock Hands #H3

    Maltese quartz clock hands have a nice design that falls between the Serpentine look and Spade. The hour hand is a friction fit and the minute hand mounts with its oblong mounting hole and a nut.

    H3: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 2 3/8 Inch (60mm)

    Wiggle Quartz Clock Hands #H11

    Wiggle quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit.

    H11: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 10 1/4 Inch (260mm)

    Spade-Variant High Torque Hands #HTH7

    Spade-Variant High Torque Hands for the standard "I" shaft battery clock movements. The hour hand will have a round hole, and the minute hand will have an oblong hole. Hour hand is a friction fit a push and twist installs it. .

    HTH7: $7.00$10.00
    View Product