3342X Clock Movement Mason n Sullivan 141-040/38

September 19, 2018 11:36 am Published by Leave your thoughts

$249.00

The Hermle 3342X calandar clock movement is a 14 day clock on a single wind. It has three strike hammers on the side that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.

In stock

The Hermle 3342X calandar clock movement runs 14 days on a single wind. It has three strike hammers on the side that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.

Additional information

Weight 3 lbs

Comparable products…

  • 3370X Clock Movement 3370X Clock Movement Mason n Sullivan 141-040K/48
    The 3370X calendar clock movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is ...

    3370X: $249.00

  • 3366X Clock Movement 3366X Clock Movement Mason n Sullivan 351-020/52
    The 3366X is a Westminster Chime unit with five chime hammers on the bottom of the movement. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with in...

    3366X: $300.00

  • 3393X Clock Movement 3393X Clock Movement Mason n Sullivan 351-020/25
    The 3393X is a Westminster Chime unit with five chime hammers on the bottom of the movement. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with in...

    3393X: $300.00

  • 3396X Clock Movement 3396X Clock Movement Mason n Sullivan 131-080/23
    The 3396X clock movement is a 8 day clock on a single wind. It has two hammers towards the top with a included bell. The movement will strike out the top of the hour via the bell, and then once for the half hour. This brand new Hermle clock movement is straight from the factory in Germany. The movement comes pre oiled and includes its improved balance for ease of fine timing. Removal of this movement is easy and w...

    3396X: $188.00

  • 3397X Clock Movement 3397X Clock Movement
    The 3397X clock movement is a 8 day clock on a single wind. It has two hammers on the back with one included bell that will play the ships bell strike sequence. This brand new Hermle clock movement is straight from the factory in Germany. The movement comes pre oiled and includes its improved balance for ease of fine timing. Removal of this movement is easy and we provide instructions for the installation. This...

    Clear

    3397X: $443.00$503.00

  • 3342X Clock Movement 3342X Clock Movement Mason n Sullivan 141-040/38
    The Hermle 3342X calandar clock movement runs 14 days on a single wind. It has three strike hammers on the side that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of...

    3342X: $249.00

  • 3354X Clock Movement 3354X Clock Movement Mason n Sullivan 351-020/38
    The 3354X is a Westminster Chime unit with five chime hammers on the bottom of the movement. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with in...

    3354X: $300.00

  • 3380X Clock Movement 3380X Clock Movement Mason n Sullivan 141-040/66
    The 3380X clock movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour. The 3380X has a 85 x 98mm outer plate measurement. They all take a #8 size clock key. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and we provide in...

    3380X: $249.00

  • 3350X Clock Movement 3350X Clock Movement Mason n Sullivan 141-040/38
    33.2mm Hand shaft Pendulum Unit 1 Hammer Back Gong Strike ...

    3350X: $249.00

  • 3360X Clock Movement 3360X Clock Movement Mason n Sullivan 141-040/23
    The Hermle 3360X clock movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour. The 3360X series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and...

    3360X: $249.00

  • 3352X Clock Movement 3352X Clock Movement Mason n Sullivan 141-040/38
    The Hermle 3352X calendar clock movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this moveme...

    3352X: $249.00

  • 3390X Clock Movement 3390X Clock Movement Mason n Sullivan 141-040/29
    The 3390X clock movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour. The 3390X series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and we pro...

    3390X: $218.00