Blocks and Forks

September 19, 2018 3:36 pm Published by Leave your thoughts

$4.89

Blocks and Forks

Choose between top block, fork or bottom block
Be sure not to bend the suspension spring when installing any of this hardware
Suspension springs bend very easily and the clock cannot run if it gets bent.

Clear

Blocks and Forks

Choose between top block, fork or bottom block
Be sure not to bend the suspension spring when installing any of this hardware
Suspension springs bend very easily and the clock cannot run if it gets bent.

Additional information

Weight 0.1 lbs
Type

Top Block, Bottom Block, Fork

Comparable products…

  • 400 Day Repair Guide 400 Day Repair Guide
    10th edition Hardcover 9x10 with 237pgs Identifications, Repair tips, and Troubleshooting. It also includes an extensive collection of back plate and suspension illustrations...

    AN4: $39.95

  • Hand Remover Tool Hand Remover Tool
    Removes hands and gears in a straight upward motion to prevent damage. It is not uncommon to have a hard time taking off the hour hand on these anniversary clocks....

    AN8: $9.89

  • Schatz Lantern Clock Key Schatz Lantern Clock Key
    Schatz Key Long brass key #3 size Fits most Schatz Lantern style 400 day clocks.If the clock is not made by Schatz, then see the other keys below or go to the clock key page.This key is longer than the norm to reach into the case of a lantern style 400 day or 1000 day Schatz clock....

    AN3: $14.89

  • Assorted Files Assorted Files
    Set of 12 needle files for various uses in clock repair. There are many assorted shapes....

    AN14: $14.89

  • Pivot Reaching Tool Pivot Reaching Tool
    Perfect tool for assembling clock movements and trying to reach hard to reach pivots and arbors. Use this tool to arrange wheels in a disassembled movement that is going together....

    AN20: $9.89

  • 400 Day Anniversary Clock Suspension Springs 400 Day Anniversary Clock Suspension Springs
    Anniversary Suspensions Single Strengths in a three pack, springs onlyAvailable in all inch sizes between .0018 and .0040Specify size with the drop down list below. To determine the size, measure the existing spring that is to be replaced, or try the repair guide on this page to see if your anniversary clock part is listed....

    Clear

    AN1: $9.89

  • Pin Vise Set Pin Vise Set
    Set of 4 with capacities from .0mm to 4.65mm. Good to use on broaches when reaming out a pivot hole diameter. Grabs hold of a post of some sort so you can work with it basically. Small part of the pinvise is knurled so it can be easily rotated....

    AN18: $14.89

  • 5 Prong Clock Keys 5 Prong Clock Keys
    These two 5 prong clock keys will wind almost all wall or mantle clocks. However, does not work well if there is a bezel / glass door involved...

    AN15: $19.89

  • Anniversary Clock Glass Dome Anniversary Clock Glass Dome
    Replacement solid glass clock dome for anniversary or 400 day style clocks...

    Clear

    AN5: $14.89$39.89

  • Blocks and Forks Blocks and Forks
    Blocks and Forks Choose between top block, fork or bottom block Be sure not to bend the suspension spring when installing any of this hardware Suspension springs bend very easily and the clock cannot run if it gets bent....

    Clear

    AN2: $4.89

  • Tapered Pin Assortment Tapered Pin Assortment
    100 Brass tapered pins with various diameters. They attach some dials, movement plates, suspensions and sometimes hands on the clock....

    AN22: $14.89