Cuckoo Clock Dancer Figurine Couple

September 19, 2018 3:37 pm Published by Leave your thoughts

$9.89

Cuckoo clock dancing man and woman figurine for the dancer platform. Sold as replacements for the broken and missing usually. These have a small hole on the bottom for the pin that sticks out the dancer platform to go into. Can also be glued on with clear epoxy sold separately. This dancing couple stands 1 1/2 inches (38mm) tall and 3/4 inch (19mm) wide. Usually a cuckoo dancer platform will take four of these, we sell them single.

In stock

Cuckoo clock dancing man and woman figurine for the dancer platform. Sold as replacements for the broken and missing usually. These have a small hole on the bottom for the pin that sticks out the dancer platform to go into. Can also be glued on with clear epoxy sold separately. This dancing couple stands 1 1/2 inches (38mm) tall and 3/4 inch (19mm) wide. Usually a cuckoo dancer platform will take four of these, we sell them single.

Additional information

Weight 0.1 lbs

Comparable products…

  • Solid Wood Deer Front Case Decoration for a Cuckoo Clock Solid Wood Deer Front Case Decoration for a Cuckoo Clock
    Solid Wood Deer Front Case Decoration for a Cuckoo Clock. Stands 4 7/8 inches (124mm) tall and 4 inches (1023=mm) wide....

    RC17: $24.89

  • Clock Movement Bar Mounts set of 4 Clock Movement Bar Mounts set of 4
    Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement to have a rear mounted unit. The nut comes off the pillar of the movement (one at a time so it does not disassemble) and then put this on the post, and lock it on with the same hex nut. When each of the four pillars has these on it, it can then mount the movement to the rear of the clock case....

    RC22: $14.89

  • Life Like Cuckoo Clock Bird with Feathers Life Like Cuckoo Clock Bird with Feathers
    A life like cuckoo clock bird with feathers. This is a nice upgrade from the old plastic kind and can be used to replace the old style. This comes with its mounting bracket and set screw. The bird is 3/8 inch (10mm) Wide and 3 1/8 inch (78mm) long....

    RC16: $14.89

  • Unstained Wooden Cuckoo Clock Bird Unstained Wooden Cuckoo Clock Bird
    Unstained wooden cuckoo clock bird with a mouth that opens when the tail is lifted. 3 1/2 inches (90mm) long and 1/2 inch (13mm) wide. Comes with its mount and set screw....

    RC14: $9.89

  • Hunter Cuckoo Clock Replacement Wooden Horn Hunter Cuckoo Clock Replacement Wooden Horn
    Hunter Cuckoo Clock Replacement Wooden Horn. These often get lost or broken so we offer these solid wood brown stained replacements. Measurements below are the diameter of the horn....

    Clear

    RC18: $19.89

  • Small Boat Figurine Decoration for Cuckoo Clocks Small Boat Figurine Decoration for Cuckoo Clocks
    Boat figurine for a cuckoo clock that has the fishing theme. This decoration would just get glued onto the cuckoo clock case with clear epoxy that is sold separately. 4 1/4 inch (108mm) long and 1 7/8 inch (48mm) wide....

    RC15: $9.89

  • Pendulum Stick Only for Cuckoo Clocks Pendulum Stick Only for Cuckoo Clocks
    Replacement pendulum stick for cuckoo clocks. It is common for these to break by being stepped on or for whatever other reason. If the pendulum is to break it would be the stick not the leaf, so we offer these replacement pendulum sticks. Also good for those making there own custom leaf bob....

    Clear

    RC2: $4.89$9.89

  • Hermle 341-340 Clock Movement Mounting Brackets Hermle 341-340 Clock Movement Mounting Brackets
    Clock Movement Mounting Brackets set of 2. This is for a front mounting a Hermle 341 or 340 series clock movement. Do not remove all four hex nuts on the movement plates at once or it will come disassembled. Just take off the hex nuts on one side at a time, take of the two hex nuts, put this on the threads, put the hex nuts back on. Do this for the other side also and your done, you can mount your movement to the fro...

    RC23: $19.89

  • Cuckoo Clock Dancer Figurine Couple Cuckoo Clock Dancer Figurine Couple
    Cuckoo clock dancing man and woman figurine for the dancer platform. Sold as replacements for the broken and missing usually. These have a small hole on the bottom for the pin that sticks out the dancer platform to go into. Can also be glued on with clear epoxy sold separately. This dancing couple stands 1 1/2 inches (38mm) tall and 3/4 inch (19mm) wide. Usually a cuckoo dancer platform will take four of these, we se...

    RC13: $9.89

  • Cuckoo Clock Figurine the Beer Drinker Cuckoo Clock Figurine the Beer Drinker
    Cuckoo Clock Figurine the Beer Drinker with a moving arm. This arm will make the beer drinker drink his beer via the clock movement. He stands 3 inches (76mm) tall and 1 1/2 inches (38mm) wide. There is a choice between a left handed or right handed figure. On the side that does not have an arm is is flat with a wire that moves the other arm with the beer....

    Clear

    RC19: $14.89

  • Cuckoo Clock Oompah Band Four Figurines Cuckoo Clock Oompah Band Four Figurines
    Cuckoo Clock Umpah Band Four Figurines sold as a set. These guys stand 2 1/4 inches (55mm) Tall and 1 inch (25mm) wide....

    RC20: $34.89

  • Cuckoo Clock Figurine the Wood Cutter Cuckoo Clock Figurine the Wood Cutter
    Cuckoo Clock Figurine the Wood Cutter with separate arm. This solid wood figure has a arm that is not attached to him, the arm is intended to go onto a saw or axe or can be made to work in whatever way. He is 2 1/2 inches (64mm) tall and is painted with overalls on....

    RC21: $14.89