Cuckoo Clock Figurine the Wood Cutter

September 19, 2018 3:37 pm Published by Leave your thoughts

$14.89

Cuckoo Clock Figurine the Wood Cutter with separate arm. This solid wood figure has a arm that is not attached to him, the arm is intended to go onto a saw or axe or can be made to work in whatever way. He is 2 1/2 inches (64mm) tall and is painted with overalls on.

In stock

Cuckoo Clock Figurine the Wood Cutter with separate arm. This solid wood figure has a arm that is not attached to him, the arm is intended to go onto a saw or axe or can be made to work in whatever way. He is 2 1/2 inches (64mm) tall and is painted with overalls on.

Additional information

Weight 0.1 lbs

Comparable products…

  • Oak Leaf Cuckoo Clock Pendulum Oak Leaf Cuckoo Clock Pendulum
    Oak leaf style cuckoo clock pendulum comes in four lengths. If you do not know what length to get it is the 8 inch most likely. The longer ones are pretty rare and are for a very large cuckoo clock. This one has a leaf that is 4 1/2 inches (11cm) long and 2 1/2 inches (6cm) wide. The leaf slides on its stick to time the clock, if the clock is running fast in time the leaf slides down. If slow then slide the leaf upwa...

    Clear

    RC3: $24.89

  • Painted Metal Purse Clock with Sunglasses Pendulum Painted Metal Purse Clock with Sunglasses Pendulum
    Painted Metal Purse Clock with Sunglasses Pendulum ...

    RC27: $39.89

  • Clock Movement Bar Mounts set of 4 Clock Movement Bar Mounts set of 4
    Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement to have a rear mounted unit. The nut comes off the pillar of the movement (one at a time so it does not disassemble) and then put this on the post, and lock it on with the same hex nut. When each of the four pillars has these on it, it can then mount the movement to the rear of the clock case....

    RC22: $14.89

  • Wooden Railroad Cuckoo Clock Front Face Dressing Wooden Railroad Cuckoo Clock Front Face Dressing
    Deep wood painted pine cuckoo clock front featuring a railroad in a country scene coming out of a brick tunnel. Thick carved quality wooden front. Reads about 9 inches across and 12 inches tall minus the pine tree tips. The inner dimensions are 3.5 inches across and wide. The wood front features a little door at the top that opens and closes for the bird. Perfect for creating a memorable time piece. ...

    RC31: $69.89

  • Cuckoo Clock Figurine the Wood Cutter Cuckoo Clock Figurine the Wood Cutter
    Cuckoo Clock Figurine the Wood Cutter with separate arm. This solid wood figure has a arm that is not attached to him, the arm is intended to go onto a saw or axe or can be made to work in whatever way. He is 2 1/2 inches (64mm) tall and is painted with overalls on....

    RC21: $14.89

  • Painted Metal Cat Clock with Moving Umbrella Painted Metal Cat Clock with Moving Umbrella
    Painted Metal Cat Clock with Moving Umbrella. This cat has a time pendulum quartz clock movement that takes one AA battery that is not included. However instead of having a pendulum below the clock it has the umbrella up above instead, that sways back and forth....

    RC29: $39.89

  • Painted Metal Cow Clock with Milk Pendulum Painted Metal Cow Clock with Milk Pendulum
    Painted Metal Cow Clock with Milk Pendulum. Takes only one AA battery to run this quartz clock pendulum movement. The pendulum is a jug a milk that swings under the cow. This clock measures 9 inches (23cm) tall from the top to the bottom of the milk pendulum and 6 inches (15cm) wide....

    RC26: $59.89

  • Colorful Animated Metal Flamingo Clock Colorful Animated Metal Flamingo Clock
    Colorful Animated Metal Flamingo Clock takes only one AA battery in its quartz pendulum movement. The pendulum is the birds leg with a drink in its foot. The clock comes with a stand so it can sit on a shelf or it can be put on the wall also. The clock is 16 inches (40cm) tall and 6 1/2 inches (17cm) wide....

    RC25: $59.89

  • Painted Metal Dog Clock with Surfboard Pendulum Painted Metal Dog Clock with Surfboard Pendulum
    Painted Metal Dog Clock with Surfboard Pendulum. This surfer dog clock's movement is a time pendulum unit that takes one AA battery not included. The clock measures 11 inches (30cm) tall from the top of the dog to the bottom of the surfboard pendulum and 8 Inches (20cm) wide overall....

    RC28: $39.89

  • Butterfly Clock with Quartz Pendulum Movement Butterfly Clock with Quartz Pendulum Movement
    Colorful painted metal butterfly clock with wagging pendulum. This clock runs by a AA battery that is not included. The clock is produced by Gall and Zick fancy designs and measures 14 inches (36cm) wide and 14 inches (36cm) tall from the top to the bottom of the pendulum....

    RC24: $59.89

  • Hermle spade variant mechanical spade hands Mechanical Spade Variant Clock Hands for German Clocks
    Hands for a German mechanical clock such as made by Hermle, Urgos or Kieninger. These hands are for a dial that is 6 inch (15cm) to 6 1/2 inch (17cm) wide from outside the numeral 3 to outside the numeral 9. Hand Fix to Chime Spot Make the minute hand point to the right spot, when the clock chimed. This is easy, just take off the minute hand and bring it to your garage. When your in your garage with the minute hand ...

    RC30: $14.89

  • Hermle 341-340 Clock Movement Mounting Brackets Hermle 341-340 Clock Movement Mounting Brackets
    Clock Movement Mounting Brackets set of 2. This is for a front mounting a Hermle 341 or 340 series clock movement. Do not remove all four hex nuts on the movement plates at once or it will come disassembled. Just take off the hex nuts on one side at a time, take of the two hex nuts, put this on the threads, put the hex nuts back on. Do this for the other side also and your done, you can mount your movement to the fro...

    RC23: $19.89