German Maltese Hands

September 19, 2018 11:36 am Published by Leave your thoughts

$14.89

For Hermle mechanical movements as well as Urgos. 5′ Dial diameter only.

Hand Fix to Chime Spot

Make the minute hand point to the right spot, when the clock chimed. This is easy, just take off the minute hand and bring it to your garage. When your in your garage with the minute hand take some pliers and turn the bushing that is inside the hand itself. Walk back to the clock and put the minute hand on and see if its now pointing closer to the quarters when chimes.

In stock

For Hermle mechanical movements as well as Urgos. 5' Dial diameter only.

Hand Fix to Chime Spot

Make the minute hand point to the right spot, when the clock chimed. This is easy, just take off the minute hand and bring it to your garage. When your in your garage with the minute hand take some pliers and turn the bushing that is inside the hand itself. Walk back to the clock and put the minute hand on and see if its now pointing closer to the quarters when chimes.

Additional information

Weight 0.1 lbs

Comparable products…

  • American Clock Hands Maltese Hands for American
    For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on) Specify if the hole in the minute hand is oblong or square. Measurement is the dial diameter ...

    Clear

    CH11: $9.89

  • Hermle maltese mechanical spade hands German Maltese Hands
    For Hermle mechanical movements as well as Urgos. 5' Dial diameter only. Hand Fix to Chime Spot Make the minute hand point to the right spot, when the clock chimed. This is easy, just take off the minute hand and bring it to your garage. When your in your garage with the minute hand take some pliers and turn the bushing that is inside the hand itself. Walk back to the clock and put the minute hand on and see if its ...

    CH12: $14.89

  • Hermle serpentine mechanical spade hands Serpentine Hands for German Mechanical Clocks
    The most popular choice for German clock movements. These black Serpentine hands come in 4 to 10 inch dial diameters. These fit most German movements in existance. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole. Hand Fix to Chime Spot Make the minute hand point to the right spot, when the clock chimed. This is easy, just take off the minute hand and bring it to your garag...

    Clear

    CH3Hands: $9.89$19.89

  • Second Hand for Grandfather Clocks Second Hand for Grandfather Clocks
    Second hand sweep for a mechanical floor clock with the second hand option. Please choose the movement number that is on the back plate of the brass movement itself for the correct second hand to be shipped. Hand Fix to Chime Spot Make the minute hand point to the right spot, when the clock chimed. This is easy, just take off the minute hand and bring it to your garage. When your in your garage with the minute hand t...

    Clear

    CH13A: $9.89

  • Pierced Spade American Clock Hands Pierced Spade Hands
    For 5 inch dial diameter. Choose square or oblong hole in the minute hand. For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on) ...

    Clear

    CH7: $9.89

  • Hermle german mechanical spade hands Spade Clock Hands For German
    These are to fit most German mechanical clock movements. The hands are measured by the time track diameter (just outside the numerals, for example outside of the 9 to outside of the 6), the minute hand length will be about half this diameter. Comes also with the shorter hour hand included in the set. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole. Hand Fix to Chime Spot...

    Clear

    CH1: $14.89$19.89

  • German Tapered Hands German Tapered Hands
    Metallic chrome tapered hands for a 14' time track. Minute hand is 7' from the center of the hole to the end. These hands are metalic chrome tone, not flat silver like the picture. These fit most German movements. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole. Hand Fix to Chime Spot Make the minute hand point to the right spot, when the clock chimed. This is easy, just take of...

    CH4: $14.89

  • American mechanical spade clock hands Spade Hands for American
    For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on). Specify if the hole in the minute hand is oblong or square. Measurement is the dial diameter ...

    Clear

    CH9: $9.89

  • ST Style American Clock Hands Seth Thomas Hands
    For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on) This has a square hole in the minute hand. ...

    Clear

    CH10: $9.89