Tapered Quartz Clock Hands

Tapered Quartz Clock Hands #H4

(4 reviews)

$1.00$18.00

-

 

Tapered quartz clock hands

Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

How to measure the minute hand

Read more »
SKU: H4 Categories: ,
Bulk discount available
H4: $1.00$18.00

Tapered quartz clock hands

Tapered quartz clock hands for the time only units sold by Clockworks. Therefore, the minute hand will have an oblong mounting hole and the hour hand is a round hole. These are Tapered quartz clock hands for the standard "I" shaft battery clock movements. So a battery time only movement bought from Clockworks will take these hands. Subsequently, the hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down. Measure Quartz clock hands by the minute hand only, from the mounting hole to the end. The hour hand comes with the pair, but only measuring the minute hand. The hour hand will just come proportionately shorter.

Battery Quartz Clock Hands - Quartz clock hands in black and gold. Please choose the length by the minute hand only. - Clockworks
About Quartz Clock HandsDescriptionCompatibility CheckMeasuring and OrderingMounting
How to measure the minute hand

These are sold as a pair with both hour and minute hands. Of course, styles vary depending on length.

Quartz Clock Hands

These are quartz Clock Hands that will fit any battery movement we offer. There are two types of quartz hands in the world. One is the China standard and one is the American standard. The China way of using the hands is with round holes in both the hour and minute hands.

Comparatively, the American style has an oblong mounting hole in the minute hand and a round hole for the hour hand that fits what is known as an "I" shaft. All of the hands that we offer fit "I" shaft movements only. In other words all of them will fit the quartz movements that we sell.

Quartz clock hand compatibility

When replacing a quartz clock movement, the old hands may fit the new movement just fine. However, if there is an oblong hole in the minute hand, chances are good that it will fit.

The hour hand will fit the new quartz movement either way. To clarify, it is the minute hand (the longer of the two hands) that is a concern. In any event, if in doubt, it is best to order new hands for the new movement upon checking out. This way it will be all set and you will have everything you need for a smooth movement swap out.

Measuring and Ordering New Hands

Quartz clock hands come together as a set, but you only measure the minute hand when replacing them. Measure it, the long hand, from the mounting hole to the tip. The shorter hand, the hour hand, comes with the minute hand and is proportionally smaller.

For larger dials that are more than 10 inches wide, see our High Torque movement and Hands section. As for Second hands, they will fit the high torque clock movements, however they do not come in long lengths like the minute hands do.

Mounting Quartz Clock Hands

Mounting quartz clock hands is easy. First put on the hour hand, with it’s round hole. As a friction fit, just push it on. The minute hand, with its oblong mounting hole, and goes on next.

Fit it onto the “I” on the top of the shaft. To tighten the hands use the nut with a hole if using a second hand. However, use the cap nut if not using a second hand.

Additional information

Weight0.01 lbs
DimensionsN/A
Minute Hand Length

1 1/2 Inch (38mm), 1 7/8 Inch (47mm), 2 1/4 Inch (57mm), 2 5/8 Inch (67mm), 2 11/16 Inch (68mm), 3 3/16 Inch (81mm), 3 5/16 Inch (84mm), 3 5/8 Inch (92mm), 9 5/8 Inch (244mm), 11 Inch (279mm), 17 1/2 Inch (444mm)

Color

Black, Gold

8
Ask a Clock Question

Subscribe
Notify of
guest

newest
oldest most voted
Inline Feedbacks
View all comments
markholtz
markholtz
1 year ago

Is it possible to carefully spray paint these hands without affecting the balance?

Robert Valsquez
Robert Valsquez
1 year ago
Rating :
     

Excellent service and product!

Dave Pott
Dave Pott
2 years ago

I need minute hand round hole .16″ dia. and hour hand round hole .12″ dia.Can you help?

Ian Bennett
Ian Bennett
3 years ago

I’m trying tp fond replacement hands for a movement that has hour pipe: 5.0mm minute pipe: 3.5mm x 2.8mm – I don’t see any measurements of the pipe openings in your hands – would these work on my clock?