Kieninger Wood Stick Clock Pendulum

September 19, 2018 11:36 am Published by Leave your thoughts

$34.89$64.89

This Kieninger wood stick clock pendulum will come unstained so it can be stained the proper color to match the clock case. The wood stick pendulum consists of the stick with the hardware and also the bob in the diameter chosen. The good thing about wood stick pendulums is they can be shortened if needed.

Please see the instructions below on how to order the proper pendulum

Clear
K-WS-PEND: $34.89$64.89

Identification

Kieninger Clock Movement Identification

Kieninger Clock Movement Identification is done by the numbers off of the back plate of the movement itself. There are some markings stamped into the brass back plate of the clock movement. These numbers will let you get the price of a new clock movement therefore have the option for a new one. Most likely the clock movement is still in production and available brand new. A brand new unit is the best way to go for cost savings, speed of job completion, and the longevity of a functioning clock.

To get the new clock movement price and what it includes, we start with the numbers. The numbers are also required to get components of the clock also. Components include pendulums, dials, hands, keys, cranks, chime blocks, mounting screws, weights, pulleys or chains.

Kieninger Clock Movement Identification

What the numbers tell us

The numbers and or letters may or may not tell us the year it was produced. The letter indicates what the movement series is. The CM length of the pendulum from the top of the movement down to the bottom of the pendulum. This length is based on a 4 1/2 inch bob diameter, if the bob is bigger, the pendulum is longer. With this information we can supply a new movement or any of the previously mentioned components.

What the new unit will include

The new clock movement will include chains or cables, the pulleys if its cable driven, the leader and suspension spring. Basically this is everything that comes out with the two screws underneath less the dial and hands if it is a floor clock.

Decoding Kieninger

So lets say the movement's numbers are 81 K 116cm.

  • 1981 =The first numbers 81 is the year made, only on older units. On new units, this number is not the year.
  • K = The K is the movements series. This is the basic raw movement plate size and internal gear configuration.
  • 116CM = The pendulum length, in centimeters, from the top of the movement all the down to the bottom of the rating nut, based on a smallest 4 1/2 inch bob diameter.

Above is stated 81 was the date, however this has changed in the later years. After a certain date that first number is no longer the date produced. So it may or may not be the date, but you can just ignore that first number when replacing the unit.

If this decoding process is confusing, just email the numbers or a picture to [email protected] Kieninger clock movement questions and ordering can be done by phone also 800-381-7458.

- - The content of this web page and web site was written and copyright by James Stoudenmire of Clockworks.com - It may not be used commercially without permission. - -

How to order

You will need CM number off of the Kieninger clock movement itself. Not off the paper work, not off the wood case. It will say a number such as 93CM or 116CM, some number followed by CM (centimeters).

Measuring note = The Germans measure there pendulum length from the TOP of the movement and all the way down to the very bottom of the pendulum rating nut threads. This could make things confusing for the customer and also this measurements varys drastically depending on the bob diameter. So the length can be tricky but lucky for you, you do not need to know all this. If your clock says something like 93cm, just choose 93cm from the list with your desired bob diameter, and we will take care of the length. The reason why this is explained here, is sometimes a customer gets the pendulum and measures it, and says "hey this pendulum does not measure 93CM and therefore it is wrong" but this is not the situation. A pendulum FOR a Keininger 93cm movement, does not mean you will get a 93cm long pendulum, it will be shorter.

Bob note = If you do not have a pendulum your replacing and its lost, we need to also figure out what bob diameter will swing around inside the case without hitting the sides. Usually people want the largest bob diameter they can get without it hitting the sides of the case. So how we figure this out is to measure how wide the inside of the clock is where the pendulum will swing. You now have some measurement like 14.5 inches or something, we deduct 4 inches from this number = 6 1/2 inches is the widest bob diameter you would want to get. You can get whatever is smaller, but dont go larger. For example you do not want a 8 1/2 inch bob because it will hit the sides, but you can use a 5 1/2 inch or 6 1/2 inch bob just fine.

Here are the steps to order the pendulum =

  • 1. Know your movement is made by Keininger by seeing above movement number examples.
  • 2. Get the CM numbers off of the back plate of the movement itself.
  • 3. Determine the bob diameter needed by measuring how wide the inside of the case is and then subtracting 4 inches.
  • 4. Decide if you want a Metal fancy Lyre style pendulum, or a Wood stick pendulum, or a brass rod pendulum if the option is there. They all come with a brass round bob at the bottom in the diameter you choose, but what it hangs on can be any of those mentioned (lyre, stick, brass rod.)
  • 5. Order it
  • When you get your pendulum you will need to put your clock in beat for it to run. This is very easy.

    This Kieninger wood stick clock pendulum will come unstained so it can be stained the proper color to match the clock case. The wood stick pendulum consists of the stick with the hardware and also the bob in the diameter chosen. The good thing about wood stick pendulums is they can be shortened if needed.

Beat Setting Mechanical Clock Movements

Beat Setting Mechanical Clock Movements means the tick and the tock sound of the clock is evenly spaced in sound. Every pendulum clock that is mechanical needs to be put in beat to run. This is so simple but its amazing to me how many clocks in the world have not run for 10 years or more, just because this is not known. Often clocks in tag sales, auctions, homes, only needed to be put in beat to run but was left unused for years and years. The setting of the beat is easy, less than a minute to do, and the clock is fine again.

Every mechanical clock that has a pendulum needs to be in beat to function. Its part of owning the clock, is the learn this. If you do not know how to do this, whenever you move the clock from here to there it will stop after 5 - 10 minutes. Putting the clock in beat is very easy.

How to put a German mechanical clock in BEAT ? (Post 1950)

This is done on Modern German clocks by pushing the pendulum all the way to one side (doesn’t matter right or left) to go beyond its resistance, and then letting it go. Now listen to see if the tick and the tock are evenly spaced. If it is stick going ticktock ticktock, or even tocktick tocktick then it is not in beat and will stop after 5min to an hour. Repeat the process above of pulling the pendulum all the way to one side and letting it go. The clock should have a nice, steady, rhythmic tick-tock, tick-tock with equal time lapsing between the tick and the tock and the next tick.

Sometimes when there is not much room to swing the pendulum in the clock case, as there is a big round pendulum bob and the case is not wide, you will need to adjust the beat in a different way. This is also true on some movements that the beat will not automatically set when swinging the pendulum wide. You would adjust the beat by pushing the top of the pendulum left or right as it hangs in its clock case, just hold a lower portion of the pendulum with your left hand as you push the top of the pendulum left or right with your right hand. You will feel the freedom in the pendulum to move left or right, with some resistance at the sides at the end of your left or right travel. You are changing the beat of the clock when you go beyond this resistance and therefore changing the place of the freedom area. Don’t be afraid to move this pendulum top as there is nothing to break as you go left or right beyond the resistance on the sides of the swing.

Bottom mount westminster clock chime block

Putting it in beat

Bottom mount westminster clock chime block

Your adjusting these

Bottom mount westminster clock chime block

Crutch being called anchor arm

Bottom mount westminster clock chime block

Leader being called suspension arm

Notes

The beat is the rhythmic pulsations of the escape wheel clicking over one tooth at a time, and this results in the sound tick / tock. What drives the pendulum is the escapement. They call it an escapement because its just letting the power of the gear train escape one tooth at a time. This make the sound tick and tock. That tick or tock sends a jumping pulse action to what is known as a crutch and that wacks the pendulum slightly each swing. The pendulums momentum back and forth, with being wacked by the crutch that comes down a little, just keeps it going and going. Provided its even left and right, in other words the tick and tock are even.

At this point, you have the movement in the clock with the dial off still. You have the movement running good. Now its time to make it chime and strike.

- - The content of this web page and web site was written and copyright by James Stoudenmire of Clockworks.com - It may not be used commercially without permission. - -

Additional information

Weight 2 lbs
CM Length

35cm, 43cm, 54cm, 65cm, 80cm, 93cm, 100cm, 116cm

Bob Diameter

3 1/8 Inch, 4 1/2 Inch, 5 1/2 Inch, 6 1/2 Inch

Tone

Polished Brass, Brushed Brass