Mantle Clock Pendulum Bob

September 19, 2018 3:36 pm Published by Leave your thoughts

$14.89

These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing.

In stock

These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing.

Additional information

Weight 0.3 lbs

Comparable products…

  • Mantle Clock Pendulum Bob Mantle Clock Pendulum Bob
    These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing....

    PD10A: $14.89

  • Kitchen Clock Pendulum Kitchen Clock Pendulum
    R and A style clock pendulum with a hook top and the rating assembly on the bottom to regulate the time. The R and A stand for Retard or Advance as the time keeping is controlled by the rating nut on the bottom of the bob. ...

    PD14: $19.89

  • Universal Antique Style Pendulum for Antique Shelf Clocks Universal Antique Style Pendulum for Antique Shelf Clocks
    This pendulum can be used for many French or Ansonia clocks. The clock pendulum parts rating nut can be removed completely if needed and it can just be adjusted shorter with the set screw on the back. Just cut the rod shorter to what is needed. ...

    Clear

    PD18: $24.89$30.00

  • Clock Rating Nut for Lyre Pendulums Clock Rating Nut for Lyre Pendulums
    This is the size rating nut for most of the Lyre pendulums for German units on the market. To turn this nut as to move the pendulum bob UP will speed time up. Down to slow time down. ...

    PD25: $9.89

  • Mantle Clock Pendulum Bob Mantle Clock Pendulum Bob
    These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing....

    PD10B: $14.89

  • Clock Pendulum Rating Nut and Threads
    A threaded rod with its rating nut is installed into the bottom of a wood stick pendulum. It is best to have a preexisting hole or a pilot hole in the wood stick so this can be threaded in. The threaded rod gets installed and then the pendulum bob slides on with the rating nut screwed on underneath. ...

    PD15: $9.89

  • Mantle Clock Pendulum Bob Mantle Clock Pendulum Bob
    These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing. ...

    PD10D: $14.89

  • Adjustable Mantle Bob Antique Style Adjustable Mantle Bob Antique Style
    This is a 1 5/8 diameter 2.8oz adjustable mantle clock pendulum bob. This is the bob needed if there is no F / S regulator on the front of the clock dial that takes the skinny end of the key. This can be used in place of a F / S regulator as well if finding the right key is not easy. This is on a slider to regulate the time....

    PD20: $19.89

  • Mantle Clock Pendulum Bob Mantle Clock Pendulum Bob
    These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing. ...

    PD10E: $14.89

  • Adjustable Antique Style Brass Rod Pendulum Adjustable Antique Style Brass Rod Pendulum
    Popular brass pendulum style for antique clock movements such as Ansonia. Bob is 35mm in diameter and weighs two ounces. The top of the pendulum has the oblong hole as the mounting style...

    Clear

    PD22: $29.89

  • Shelf Clock Pendulum Rating Nuts Shelf Clock Pendulum Rating Nuts
    These pendulum rating nuts are for antique ginger bread or kitchen style type clocks that require a larger nut hole diameter. Also good for larger threaded rating rod diameters on antique floor clocks. This is a assortment of 6 as these can be tricky to match up and get the one you need sometimes....

    PD17: $14.89

  • Mantle Clock Pendulum Bob Mantle Clock Pendulum Bob
    These are for mantle movements with the F-S regulator that you can adjust the timing. This is because there is no rating assembly to adjust the timing....

    PD10C: $14.89