NEW 130-627 Clock Movement by Hermle

September 19, 2018 11:35 am Published by Leave your thoughts

$199.00

The Hermle 130-627 clock movement runs 8 days on a single wind. It has three hammers below the unit that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 130 series has a 90mm plate diameter. They all take a #4 size clock key.

This brand new Hermle clock movement is straight from the factory in Germany. The movement comes with the improved balance wheel for ease of fine timing.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

Description

Assistance = 800-381-7458

Selecting the movement

The numbers on the back plate of the movement is everything one needs to get a replacement. If the numbers match then the movement matches. If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit. Hermle Clock Movement 131 Series
  • Balance Escapement
  • 3 Hammer Below
  • Bim Bam Strike
  • Back Wind
  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order
The Hermle 130-627 clock movement runs 8 days on a single wind. It has three hammers below the unit that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 130 series has a 90mm plate diameter. They all take a #4 size clock key. This brand new Hermle clock movement is straight from the factory in Germany. The movement comes pre oiled and includes its improved balance for ease of fine timing. Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help. Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.


HERMLE MOVEMENT DIRECTORY

Hermle movement number starts with....

Additional information

Weight 3 lbs

You may also like…