NEW 141-020 Rear Pendulum Movement By Hermle

September 19, 2018 3:36 pm Published by Leave your thoughts

$229.00$259.00

Please note, the 141-020 unit comes in front or rear pendulum options. This one is the rear pendulum unit, if you need the front pendulum we offer that also.

The 141-020 clock movement runs 14 days on a single wind up. It has one hammer on the bottom that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.

Description

Assistance = 800-381-7458

Selecting the movement

The numbers on the back plate of the movement is everything one needs to get a replacement. If the numbers match then the movement matches.

If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit.

Hermle 141 Series
  • REAR Pendulum
  • 33.2mm Hand shaft
  • 1 Hammer Below
  • Gong Strike
  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order

Please note, the 141-020 unit comes in front or rear pendulum options. This one is the rear pendulum unit, if you need the front pendulum we offer that also.

The 141-020 clock movement runs 14 days on a single wind up. It has one hammer on the bottom that will strike out the hours a the top of the hour, and strike once for the half hour. The Hermle 141 series has a 85 x 98mm outer plate measurement. They all take a #8 size clock key.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.



HERMLE MOVEMENT DIRECTORY

Hermle movement number starts with....

Additional information

Weight 3 lbs

You may also like…