NEW 241-840 Clock Movement by Hermle

September 19, 2018 3:36 pm Published by Leave your thoughts

$239.00

The Hermle 241-840 clock movement runs 8 days on a single wind up. It has one hammer on the back that will strike a gong or bell. The movement will strike out the top of the hours, and then once for the half hour.

This high quality weight driven German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

Clear

Description

Assistance = 800-381-7458

Selecting the movement

The numbers on the back plate of the movement is everything one needs to get a replacement. If the numbers match then the movement matches.

If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit.

  • 33.2mm Hand shaft
  • 1 Hammer Back
  • Takes a #8 Crank
  • Cable Driven
  • Cables & Pulleys Inluded
  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order

The Hermle 241-840 clock movement runs 8 days on a single wind up. It has one hammer on the back that will strike a gong or bell. The movement will strike out the top of the hours, and then once for the half hour.

This high quality weight driven German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

This high quality weight driven German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

This high quality weight driven German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

Notes on the Hermle 241 series

The Hermle 241 series movements come in both chain driven or cable driven styles. They are all pendulum units with a 85 x 98mm plate size. What is being sold on this webpage is the movement with the chains, hand nut, leader and suspension spring. These units do not include the weights, pendulum, dial, hands or chime block.

The German made movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.



HERMLE MOVEMENT DIRECTORY

Hermle movement number starts with....

Additional information

Weight 3 lbs
CM Length

66cm, 75cm, 85cm, 94cm

You may also like…