Pivot Reaching Tool

September 19, 2018 11:38 am Published by Leave your thoughts

$9.89

Perfect tool for assembling clock movements and trying to reach hard to reach pivots and arbors. Use this tool to arrange wheels in a disassembled movement that is going together.

In stock

Perfect tool for assembling clock movements and trying to reach hard to reach pivots and arbors. Use this tool to arrange wheels in a disassembled movement that is going together.

Additional information

Weight 0.2 lbs

Comparable products…

  • Schatz Lantern Clock Key Schatz Lantern Clock Key
    Schatz Key Long brass key #3 size Fits most Schatz Lantern style 400 day clocks.If the clock is not made by Schatz, then see the other keys below or go to the clock key page.This key is longer than the norm to reach into the case of a lantern style 400 day or 1000 day Schatz clock....

    AN3: $14.89

  • Pivot Reaching Tool Pivot Reaching Tool
    Perfect tool for assembling clock movements and trying to reach hard to reach pivots and arbors. Use this tool to arrange wheels in a disassembled movement that is going together....

    AN20: $9.89

  • Assorted Files Assorted Files
    Set of 12 needle files for various uses in clock repair. There are many assorted shapes....

    AN14: $14.89

  • 400 Day Repair Guide 400 Day Repair Guide
    10th edition Hardcover 9x10 with 237pgs Identifications, Repair tips, and Troubleshooting. It also includes an extensive collection of back plate and suspension illustrations...

    AN4: $39.95

  • Anniversary Clock Glass Dome Anniversary Clock Glass Dome
    Replacement solid glass clock dome for anniversary or 400 day style clocks...

    Clear

    AN5: $14.89$39.89

  • Micrometer Micrometer
    Available in readings of 0-25 Use this or the caliper to determine the thickness of the old anniversary clock suspension so you can get the correct new one....

    AN9: $14.89

  • Hand Remover Tool Hand Remover Tool
    Removes hands and gears in a straight upward motion to prevent damage. It is not uncommon to have a hard time taking off the hour hand on these anniversary clocks....

    AN8: $9.89

  • Tapered Pin Assortment Tapered Pin Assortment
    100 Brass tapered pins with various diameters. They attach some dials, movement plates, suspensions and sometimes hands on the clock....

    AN22: $14.89

  • Blocks and Forks Blocks and Forks
    Blocks and Forks Choose between top block, fork or bottom block Be sure not to bend the suspension spring when installing any of this hardware Suspension springs bend very easily and the clock cannot run if it gets bent....

    Clear

    AN2: $4.89

  • 5 Prong Clock Keys 5 Prong Clock Keys
    These two 5 prong clock keys will wind almost all wall or mantle clocks. However, does not work well if there is a bezel / glass door involved...

    AN15: $19.89

  • Pin Vise Set Pin Vise Set
    Set of 4 with capacities from .0mm to 4.65mm. Good to use on broaches when reaming out a pivot hole diameter. Grabs hold of a post of some sort so you can work with it basically. Small part of the pinvise is knurled so it can be easily rotated....

    AN18: $14.89