#QU22NP Chiming Quartz Clock Movement

September 19, 2018 11:36 am Published by Leave your thoughts

$39.89

Please select the hands from the next page if you need them, just click Add To Cart and they will show up.

4×4 Westminster Chime
Chime synchronization knob
Takes one C cell battery
Made by Takane
Built in speaker
7/16 Diameter Post

Low price chiming unit that does not take up much room. The bob is the round disk on the pendulum.

Clear
QU22NP: $39.89
Bulk discount available

Low price chiming unit that does not take up much room.

  • 4x4 Westminster Chime
  • Chime synchronization knob
  • 16' pendulum at longest
  • Takes one C cell battery
  • Made by Takane
  • Built in speaker
  • 7/16 Diameter Post
  • Size: 4 x 3 x 1 1/4

How to make the clock chime when its supposed to.

First we need to know, the clock chime is correct no matter what it says the chime is, its right. We only need to have the hands point to where the clock thinks it is, or where its chiming in other words. And then set the clock to time.

So to point the hands to where the clock chimed we need to remove the hands, and put them back on the clock where the clock chimed. In other words if it chimed out that its 3 oclock, put the hour hand to the three and the minute hand to the 12.

IF the clock minute hand will not point exactly to the 12, do this. Find the circle spinning setting knob on the back of the movement and hold this still with your fingers so it will not move. At the same time you stop this from moving, point the minute hand to the 12 where it was supposed to point to when it chimed. Let go of both.

Commonly bought with..

  • quartz clock hand 1 #H1 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H1: $0.89
  • quartz clock hand 10B #H10 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H10: $0.89
  • quartz clock hands 11B #H11 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H11: $0.89
  • quartz clock hands 12B #H12 Quartz Clock Hands
    Quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from us, these will fit. We only carry the "I" shaft units. What this means is the hour hand will have ...
    Clear
    H12: $0.89

Additional information

Weight 0.4 lbs
Threaded Post Length

7/16 Inch, 11/16 Inch, 15/16 Inch

Pedulum Bob Diameter

2 1/8 Inch, 2 3/4 Inch, 3 1/2 Inch, Non Pendulum

Comparable products…

  • Chiming quartz clock movement with the best sound by clockworks.com #QU40 Chime Pendulum Clock Movement
    When replacing, you will need to measure the post on the old unit, so you can match it up with your new chiming quartz movement. The post is the part that goes through the dial (face) and mounts from the front. Chim ...
    Clear
    QU40P: $59.89