#QU40NP Chime Quartz Clock Movement

$60.00

Song options: Westminster every quarter, or Westminster, Ave Maria, Bim Bam options on the top of the hour only. On the top of the hour it will count out the hours after the song. Includes a light sensor and will be silent automatically if its dark in the room.

Please select the hands from the next page if you need them, just click Add To Cart and they will show up.

Volume control
AutoNight Silence Switch
Light sensor for chime off
Takes 2 C cell batteries
5/16 Diameter post

Read more »
QU40NP: $60.00
Bulk discount available

#QU40 Four Melody Chime (Best Sound)

4 9/16' x 4 3/4' x 1 1/8'

Hands are available next page

Chime Sample1 Sample2 Sample3 Sample4 Song options: Westminster every quarter, or Westminster, Ave Maria, Bim Bam options on the top of the hour only. On the top of the hour it will count out the hours after the song. Includes a light sensor and will be silent automatically if its dark in the room.
  • Volume control
  • 16' pendulum at longest
  • AutoNight Silence Switch
  • Light sensor for chime off
Instructions

1-4Units $69 5-11Units $64 12 Units $59

How to make the clock chime when its supposed to. First we need to know, the clock chime is correct no matter what it says the chime is, its right. We only need to have the hands point to where the clock thinks it is, or where its chiming in other words. And then set the clock to time. So to point the hands to where the clock chimed we need to remove the hands, and put them back on the clock where the clock chimed. In other words if it chimed out that its 3 oclock, put the hour hand to the three and the minute hand to the 12. IF the clock minute hand will not point exactly to the 12, do this. Find the circle spinning setting knob on the back of the movement and hold this still with your fingers so it will not move. At the same time you stop this from moving, point the minute hand to the 12 where it was supposed to point to when it chimed. Let go of both.

Commonly bought with..

  • launch

    View Product

    View more

    turned_in_out 4 11/16 Inch (119mm)

    Serpentine Quartz Clock Hands #H1

    Serpentine quartz clock hands will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

    Read more »
    H1: $1.00
  • launch

    View Product

    View more

    turned_in_out 4 7/8 Inch (124mm)

    Rounded Quartz Clock Hands #H12

    Rounded quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit.

    Read more »
    H12: $1.00
  • launch

    View Product

    View more

    turned_in_out 2 3/8 Inch (60mm)

    Wiggle Quartz Clock Hands #H11

    Wiggle quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit.

    Read more »
    H11: $1.00
  • launch

    View Product

    View more

    turned_in_out 2 1/2 Inch (63mm)

    Crescent-Moon Quartz Clock Hands #H10

    Crescent-Moon quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit. We only carry the "I" shaft units.

    Read more »
    H10: $1.00

Additional information

Weight0.3 lbs
Threaded Post Length

5/16 Inch, 7/16 Inch, 11/16 Inch

Pedulum Bob Diameter

2 1/8 Inch, 2 3/4 Inch, 3 1/2 Inch, Non Pendulum

  • Volume control
  • 16' pendulum at longest
  • AutoNight Silence Switch
  • Light sensor for chime off

2
Ask a Clock Question

avatar
1 Comment threads
0 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
1 Comment authors
Charlie Ratliff Recent comment authors
  Subscribe  
newest oldest most voted
Notify of
Charlie Ratliff
Guest
Charlie Ratliff

what is the bim bam sound