Round Clock Dial Assortment

September 19, 2018 11:35 am Published by Leave your thoughts


Ten piece clock dial assortment made of heavy paper stock and plastic. Sized dials from 4 inch to 11 inch assorted. These dials can be glued to a wooden back board and used for many quartz clock projects.

Out of stock

Round Clock Dial Assortment

Ten piece clock dial assortment with a variety of sizes. Use spray glue at adhere to a thin board. Works nice for quartz clock movements. Arabic and or Roman, made from Tyvek or thin plastic.

Clock dial drilling description

Description of what it means to require drilling of the clock dial. Clock dials often only have the center hole for the clock hand post to come through. If using a spring driven mechanical clock movement, holes would need to be drilled. This is so the clock key will have access through the dial to wind the clock. This hole is typically 3/8 of an inch wide.

What is a time track

A time track is that outer ring that runs around the Roman numerals. The mechanical clock hands and also the battery run clock hands are based on this measurement.

About dial grommets

A dial grommet is a decorative ring that gets inserted into the winding hole to make it look pretty. It is a metal ring with prongs on the back to fold behind the clock dial thus mounting the grommet via friction fit only. Dial grommets have a 3/8 hole in the center and in some rare situations it is 1/2 inch.

Clock dial drilling description

The clock dial can be drilled out to wind a mechanical clock movement with a key. Use dial grommets for a nice finish on the new winding holes. can drill this before shipping for a fee of $20.

Paper dial information

The paper dials on this page come square but have a round time track. Spray glue can be used to stick the paper stock dial onto a thin board for a dial. If the dial is to be round instead of square it will require cutting into shape.

Round clock dial information

The round metal dials may come with a protective plastic coating that is removed by the customer, it is hard to tell it is there sometimes but if the dial has scratches, it most likely has this coating that needs to be removed for the finished clock project.

Additional information

Weight 0.8 lbs

Ask a Clock Question