S Type Rotor Clock Motor

September 19, 2018 11:37 am Published by Leave your thoughts

$29.89

S’ Type Rotor

M3635 60 cycles and 3.6 RPM.

Replaces M2492, M3072, M3083, M3141, M3154, M3156, M3162, M3296, M3313, M3331, M3333, M3378, M3394, M3404, M3476, M3479, M3481, M3518, M3520, M3633
Electric Clock Motors

'S' Type Rotor

M3635 60 cycles and 3.6 RPM.

Replaces M2492, M3072, M3083, M3141, M3154, M3156, M3162, M3296, M3313, M3331, M3333, M3378, M3394, M3404, M3476, M3479, M3481, M3518, M3520, M3633.

Commonly bought with..

  • Howard Miller Style High Torque Clock Hands Long High Torque Clock Hands #HTH7
    High Torque hands are long hands that need to go on a high torque battery operated clock movement. The hands have the USA standard 'I' shaft mounting hole in the minute hand. What this means is the hour hand will have a round mounting hole and the minute hand will have an oblong hole. These hands are sold as a pair, and measured by the minute hand only from the center of the mounting hole to the end of the pointer ...

    Clear

    HTH7: $6.89$9.89

  • Long High Torque Clock Hands #HTH8 Long High Torque Clock Hands #HTH8
    High Torque hands are long hands that need to go on a high torque battery operated clock movement. The hands have the USA standard 'I' shaft mounting hole in the minute hand. What this means is the hour hand will have a round mounting hole and the minute hand will have an oblong hole. These hands are sold as a pair, and measured by the minute hand only from the center of the mounting hole to the end of the pointer si...

    Clear

    HTH8: $8.89

  • Long High Torque Clock Hands #HTH3 Long High Torque Clock Hands #HTH3
    Attn: The high torque clock movement that is required to run these hands are offered during the check out process. If you hit the add to cart button they will show up. High Torque hands are long hands that need to go on a high torque battery operated clock movement. The hands have the USA standard 'I' shaft mounting hole in the minute hand. What this means is the hour hand will have a round mounting hole and the...

    Clear

    HTH3: $1.89$14.89

  • Long High Torque Clock Hands #HTH1 Long High Torque Clock Hands #HTH1
    High Torque hands are long hands that need to go on a high torque battery operated clock movement. The hands have the USA standard 'I' shaft mounting hole in the minute hand. What this means is the hour hand will have a round mounting hole and the minute hand will have an oblong hole. These hands are sold as a pair, and measured by the minute hand only from the center of the mounting hole to the end of the pointer ...

    Clear

    HTH1: $2.89$12.89

Additional information

Weight 0.2 lbs

Comparable products…

  • Clock Hansen Electric #A-43RA Motor Clock Hansen Electric #A-43RA Motor
    Hansen Electric #A-43RA Hansen Synchron Motor to replace bad units. 1RPM, 60CC. Complete with a 10 tooth pinion. This unit's pinion rotates to the right, clockwise. 110 Volt 60 Cycle ...

    EL2: $59.89

  • S Type Rotor Clock Motor S Type Rotor Clock Motor
    'S' Type Rotor M3635 60 cycles and 3.6 RPM. Replaces M2492, M3072, M3083, M3141, M3154, M3156, M3162, M3296, M3313, M3331, M3333, M3378, M3394, M3404, M3476, M3479, M3481, M3518, M3520, M3633....

    EL9: $29.89

  • Spartus 58 Clock Motor Spartus 58 Clock Motor
    Spartus 58 Spartus model 58 electric time pendulum clock movement. Pendulum included but is optional. Chime rod, mounting hardware and hand nut NOT included. 120V, 60Hz ...

    EL6: $19.89

  • Type B Rotor Type B Rotor
    Type B Rotor Replacements for B type rotor assemblies. These simplex motors will replace the entire field, coil, and rotor assembly. These are non reversible and have 20 times more torque than a rotor. For telechron units. 60cycles 1RPM....

    EL7: $69.89

  • Golden Hour Golden Hour
    Golden Hour Golden Hour replacement clock motor supplied with a 27 tooth gear. 110 Volts 60 cycles ...

    EL5: $99.89