Shop
Shop by Category
- Battery Operated Clock Movements
- Clock Movements
- Mechanical Movements
- Grandmother Clock Kits
- Grandfather Clock Kits
- Hermle Clock Movements
- 261 Hermle Clock Movement
- 340/341 Hermle Clock Movement
- 350/351 Hermle Clock Movement
- 451 Hermle Clock Movement
- 461 Hermle Clock Movement
- Hermle Clock Movement 1050/1051
- 1151 Hermle Clock Movement
- 1161 Hermle Clock Movement
- 1171 Hermle Clock Movement
- 130/131 Hermle Clock Movement
- Hermle Clock Movement 140/141
- 241 Hermle Clock Movement
- Kieninger Clock Movement
- Urgos Clock Movements
- Jauch Clock Movement
- Clock Parts
- American Clock Movement Reproductions
- Cuckoo Clock Movement
- Spring Driven Movements
- Weight Driven Movements
- Mechanical Clock Kits
- Ships Bell Alternatives
- Mechanical Movements
- All Clock Parts
- Chime Accessories
- Quartz Clock Second Hands
- German Mechanical Clock Pendulums
- Super Long Clock Hands
- Hardware for Clocks
- Clock Keys and Cranks
- Cuckoo Clock Parts
- 400 Day Clock Parts
- Clock Dials
- Clock Hands
- Bushings
- Small Specialty Pendulums
- Mainsprings
- Mechanical Grandfather Clock Weights
- Mechanical Clock Chime Rods
- Repair Books
- Clock Repair Tools
- Clockworks Clock Repair Service
- Watch Repair
- Gallon Solutions
- Hermle
- Howard Miller
- Kieninger
- Urgos
- Ridgeway
- Colonial
- Sligh
- Emporer
- Jauch
- Hamilton
- Mechanical to Quartz Conversion
- Clock Tools
- Repair Kits
- Oiling and Cleaning
Showing 17–32 of 1027 results
launch
View Product
View moreturned_in_out Suspension Springs
Anniversary Clock Suspension SpringsSingle Strength suspension springs in a three pack. These are the springs only with no fork or blocks.
AN1: $9.00 – $10.00View Productlaunch
View Product
View moreturned_in_out 400 Day Clock Parts
Brass Single-End Clock KeySingle end brass clock key to wind up a wall or mantle mechanical clock movement. See instructions on the top tabs for how to get the right size key for your clock.
CK4: $10.00View Productlaunch
View Product
View moreturned_in_out Quartz Clock Movement Parts and Accessories
Quartz Clock PendulumA quartz clock pendulum rod and bob. The bob comes in three sizes as listed on the order menu. Overall max length is 16 inches. This will work on any quartz clock movement offered by Clockworks.
Q-BOB: $6.00 – $8.00View Productlaunch
View Product
View moreturned_in_out Battery Clock Hands
Diamond-shaped Quartz Clock Hands #H8Diamond-shaped quartz clock hands fit battery clock movements purchased from Clockworks. Minute hand has an oblong mounting hole whereas the hour hand has a round one.
h8: $1.00 – $3.00View Productlaunch
View Product
View moreturned_in_out Oiling and Cleaning
Clock Cleaning Solution Concentrate One PintOne pint of ammonia concentrate clock cleaning solution. Excellent for cleaning movements by hand, or to use with an ultrasonic cleaning machine. Mix 1 part of this solution to 10 parts of hot water.
launch
View Product
View moreturned_in_out 400 Day Clock Parts
Anniversary Clock Blocks and ForkThese are the parts on the suspension spring of an Anniversary clock. Sometimes these are lost and most often it is the bottom block that is missing. Please choose either top block, fork, or bottom block from the drop down menu.
AN2: $10.00 – $29.00View Productlaunch
View Product
View moreturned_in_out Clock Weight Accessories
Clock Weight Top Hook KitBrass top Clock Weight Hook Kit for modern German clock movements such as Hermle / Urgos / Kieninger. The top hooks are made with external threads or internal threads and also M4 threads or M5 threads.
launch
View Product
View moreturned_in_out Cuckoo Clock Parts
Cuckoo Clock HandsHour and minute hand for post 1950 cuckoo clocks. The hands are measured by the minute hand length from the center of the mounting hole to the end. The hour hand comes with the set of hands and does not get measured.
CU10: $8.00View Productlaunch
View Product
View moreturned_in_out Oiling and Cleaning
Needle Pen Clock OilerPrecision pen oiler that contains quality semi-synthetic general purpose clock oil. The long needle makes tough spots easy to reach. If it slides, grease it. If it spins, oil it.
launch
View Product
View moreturned_in_out Battery Clock Hands
Straight Quartz Clock Hands #H6Straight quartz clock hands for the standard "I" shaft battery clock movements. These will fit any battery movement sold by Clockworks.
H6: $1.00 – $2.00View Productlaunch
View Product
View moreturned_in_out German Mechanical Clock Hands
Serpentine Mechanical Clock HandsThis is a set of Serpentine Mechanical Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.
CH3Hands: $16.00 – $35.00View Productlaunch
View Product
View moreturned_in_out Cuckoo Clock Parts
Cuckoo Clock Bellow TopsCuckoo Clock Bellow Tops are replaced when the bellow cloth is ripped. These are sold as a pair of two, left and right.
CU4: $18.00 – $23.00View Productlaunch
View Product
View moreturned_in_out Mechanical Grandfather Clock Weights
Polished Complete Clock WeightComplete clock weight in polished Brass tone, Comes with top and bottom caps, hardware and lead center filler. Please see the information tabs for the weight specifications required for the clock.
WEIGHT: $80.00 – $140.00View Productlaunch
View Product
View moreturned_in_out
Chiming Quartz Clock Movement by SeikoReliable and durable this chiming quartz clock movement is a quality movement by Seiko. Please scroll down to learn about replacing or building clocks with this unit.
QU30P: $60.00View Productlaunch
View Product
View moreturned_in_out Super Long Clock Hands
Spade Super-Torque Clock HandsSpade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.
HTH3: $13.00 – $15.00View Productlaunch
View Product
View moreturned_in_out Round Quartz Clock Inserts
Clock Insert For 1-3/8-Hole #F1Clock insert #F1 is a round friction fit clock that is 1 7/16 (37mm) wide. It fits snug in a 1 3/8 (35mm) hole, with an overall depth of 3/8 (10mm). [bulk-discount-shortcode sku="F1"]
F1: $14.00View ProductShop By Brand