Shop

Showing 33–48 of 1027 results

• turned_in_out Hardware for Clocks

  German Clock Hand Nuts

  German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Therefore, Cuckoo clock hand nuts are available on the cuckoo parts page.

  CP9: $10.00

  German Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Round Convex Clock Glass

  Round convex clock glass gets measured from one side to the other, the overall width. When working with a clock bezel it is important to order the right sized clock glass. If the glass is too narrow it will fall out the front of the bezel.

  BZ2: $11.20 – $45.00

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Premium Chime Clock Movement QU40

  Best sound quality on the market. This unit will chime as if it was a big grandfather clock. Also has volume control and an automatic night silence option. Please scroll down on this page to read all about it. 4 9/16″ x 4 3/4″ x 1 1/8″ [bulk-discount-shortcode sku="QU40P"]

  QU40P-B:

  View Product

• turned_in_out Battery Clock Hands

  Fancy Quartz Clock Hands #H9

  Fancy quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit. We only carry the "I" shaft units.

  H9: $1.00

  View Product

• turned_in_out Clock Book Sale

  Clockworks Clock Repair E-Book

  The success of this Clockworks Clock Repair E-Book is from the simplicity in the answers and the ease of use. Clock owners can solve simple problems that arise with their clock. The topics you see below are the actual topics that are on the cover page of the E-Book.

  EBOOK: $24.00 $15.00

  Clockworks Clock Repair E-Book quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Clock Parts Chime Hammer

  The chime hammers are the clock parts that strike the chime rods. These hammers come in three sizes which are the approximate length of the hammer from the tip to the screw and are available in nylon or leather. Also available are just the tips themselves in nylon.

  CP1: $1.00 – $10.00

  View Product

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Pine-Cone Weights

  Cuckoo clock weights are in the form of pine cones. They are sold in gram weight and this gram amount is usually stamped on the weight itself. Cuckoo clocks all take the same weight for all the chains with only a few exceptions.

  CU5: $20.00 – $60.00

  View Product

• turned_in_out Suspension Springs

  Urgos Clock Pendulum Suspension

  Suspension springs for some styles of Urgos floor clock movements. The square grandmother clock size movement may take the smaller size spring. Whereas, the rectangle grandfather movements take the larger size. However, these are not the only styles for Urgos movements.

  SUS-B: $15.60

  View Product

• turned_in_out Round Clock Dials

  Round White Clock Dial

  White round dial in either Arabic or Roman numerals. Available in either thin metal aluminum or PVC (It is like thick fiber paper) Remember to remove the protective plastic coating. The sized listed below are the overall width from side to side.

  RD4: $3.00 – $20.00

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Pendulum Quartz Clock Movement QU3

  Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This is the length of the minute hand from the mounting hole to the end. 2 1/8″ x 3 3/4″ x 7/8″ [bulk-discount-shortcode sku="QU3"]

  QU3-B:

  View Product

• turned_in_out Square Clock Dials

  Heavy Paper Clock Dial

  Select Arabic or Roman Numerals, White or Ivory. Measurements are from outside the numeral on one side to outside the numeral on the other side. This would be the time track diameter and this is the ring that travels around the outside of the numerals.

  PDIAL1: $1.00 – $6.00

  View Product

• turned_in_out Mechanical to Quartz Conversion

  Heavy-Duty Clock Pendulum Drive

  The pendulum drive is a heavy-duty battery unit that can swing any mechanical clock pendulum. Uses only two C cell batteries and is very strong. Tested with 2lbs 8oz (1100 grams), 44 inch long metal lyre pendulum with 8 ½ wide bob. When testing with a lighter pendulum with a 10 1/2 inch wide bob, it did not swing as... View Product

  HDPend: $36.00

  Heavy-Duty Clock Pendulum Drive quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Mainspring Clamps 4PC

  Comes in a set of 4 to keep a mainspring in the wound position. This keeps them under control while replacing them in the movement or barrel. Best to get two of these sets in order to have a pair with the correct size for the mainspring.

  CT2: $17.00

  Clock Mainspring Clamps 4PC quantity

  ADD TO CART

• turned_in_out Suspension Springs

  Pendulum Suspension Spring Rods

  Frequently needed pendulum suspension spring rods in 17 inch lengths. These suspension rods are cut, bent, and modified as needed for the pendulum to hang onto the clock. They replace the pendulum suspension rods that have worn out and has the spring steel broken.

  LSUS-C: $15.00

  Pendulum Suspension Spring Rods quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Clock Chain End Hooks

  Hook and ring set for chain driven floor clock models. The chain link only consists of a bent wire that loops around to itself. Only needs two needle nose pliers to open the connecting point on the link and install these pieces.

  CP16: $7.00

  Clock Chain End Hooks quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Chain Hook Set

  Installation of the cuckoo chain hook and ring set is easy. Each link on the chain is only a wire folded into a unsoldered loop only. With two needle nose pliers a simple twist is all that is is needed to open the link.

  CU15: $8.00

  Cuckoo Chain Hook Set quantity

  ADD TO CART