Clock Movement Bar Mounts set of 4

September 19, 2018 3:37 pm Published by Leave your thoughts

$14.89

Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement to have a rear mounted unit. The nut comes off the pillar of the movement (one at a time so it does not disassemble) and then put this on the post, and lock it on with the same hex nut. When each of the four pillars has these on it, it can then mount the movement to the rear of the clock case. Sold as a set of four. They measure 2 7/8 inch (73mm) long overall and 1/2 inch (13mm) wide.

In stock

Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement to have a rear mounted unit. The nut comes off the pillar of the movement (one at a time so it does not disassemble) and then put this on the post, and lock it on with the same hex nut. When each of the four pillars has these on it, it can then mount the movement to the rear of the clock case.

Additional information

Weight 0.1 lbs

You may also like…