Clock Weights

Showing all 10 results

  • Clock Chain for a Floor clock Clock Chain
    These come between 5 and 6 foot lengths. You can chop them smaller to hang your weight shells in the air on the quartz grandfather clock conversion kit. These are solid brass and usually go on a mechanical grand father c ...
    QCChain: $14.89
  • Clock Chain Ends Hook and Tab Set Clock Chain Ends Hook and Tab Set
    Hook and ring set for chain driven floor clock models. The chain link only consists of a bent wire that loops around to itself, you only need two needle nose pliers to open the connecting point on the link and install th ...
    CP16: $4.89
  • Clock Weight Hook Clock Weight Hook
    Brass top hook for modern German movements such as Hermle / Urgos / Kieninger. Comes either with external threads or internal threads. The M* number is the thread size of the screw/bolt, M4 is 4mm, M5 is 5mm. ...
    Clear
    WE6: $6.89
  • Cuckoo Hook and Ring for Chain Cuckoo Hook and Ring for Chain
    The hook goes on one end of the chain to hold the weight up in the air. The ring goes on the other side of the same chain so the chain will not travel into the movement and jam up the clock if the clock was not wound ...
    CU15: $4.89
  • Genuine Replacement Cable for Grandfather Clocks Genuine Replacement Cable for Grandfather Clocks
    This is the original factory replacement Clock Weights cable for German clock movements with installed cable ends. The first number is the thickness such as .040 and then the next number is the total length such as 76 In ...
    Clear
    WE3: $19.89
  • Polished Clock Weight Polished Clock Weight
    Complete clock weight in polished Brass tone or dark antiqued brass tone, Comes with top and bottom caps, hardware and lead center filler. ...
    Clear
    WEIGHT: $64.89$124.89
  • Polished Clock Weight Cap Polished Clock Weight Cap
    Weight shell end caps are the tops and bottom of the weight casing. This comes for either a 43mm, 47mm shell or a 60mm shell and sold individually. ...
    Clear
    WE1: $9.89
  • Polished Clock Weight Shell Only Polished Clock Weight Shell Only
    Polished clock weight shell. No lead filler, just the new outer shell, the rod in the middle, the two caps and the hook on the top and the nut on the bottom. ...
    Clear
    WSHELL: $39.89$49.89
  • Solid  Brass Clock Pulley SolidBrass Clock Pulley
    German solid brass cable pulley for Hermle / Urgos / Kieninger clock movements. These come in either 1 1/2 inch diameter or 1 3/4 inch diameter. ...
    Clear
    WE5: $14.89
  • Tall Case Pulley Tall Case Pulley
    Pulley for the tall case antique clock. This is useful for the cable driven antique clocks for the cable to loop through and the weight to hang on. ...
    CP41: $19.89