Mechanical Movements

Showing 1–12 of 169 results

  • 1051-020 Clock Movement by Hermle
    Assistance = 800-381-7458 Selecting the movement The numbers on the back plate of the movement is everything one needs to get a replacement. If the numbers match then the movement matches. If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit.
    Clear

    1051-020: $368.00

  • 3397X Clock Movement 3397X Clock Movement
    The 3397X clock movement is a 8 day clock on a single wind. It has two hammers on the back with one included bell that will play the ships bell strike sequence. This brand new Hermle clock movement is straight from the factory in Germany. The movement comes pre oiled and includes its improved balance for ease of fine timing. Removal of this movement is easy and we provide instructions for the installation. This...

    Clear

    3397X: $443.00$503.00

  • 3621X Clock Movement 3621X Clock Movement
    The 3621X is a Westminster Chime unit with five chime hammers below the movement. This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut. Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can...

    3621X: $259.00

  • Antique Kitchen Clock Replacement Movement Antique Kitchen Clock Replacement Movement
    Very popular table clock movement dimensions on Kitchen or Gingerbread cases. The drop means the clock will have an overall pendulum length described below at the place where it will keep the right time. If replacing a unit, your pendulum will work as long as the drop is the same, or made the same, by altering the suspension wire and/or the pendulum to create the correct overall length from the hand shaft. Pl...

    Clear

    MVT2: $169.00$199.00

  • Antique Mantle Clock Replacement Movement Antique Mantle Clock Replacement Movement
    Very popular mantle clock movement that will mount in the front of the clock on the dial side going in from the back of the clock case. The drop means the clock will have a shorter overall pendulum length as described above at the place where it will keep the right time. These measurements on the movement is a very popular replica of the Mantle clock movements produced in America in the early 1900s. You will need ...

    Clear

    MVT3: $169.00$199.00

  • Bell Set For Kieninger Bell Set For Kieninger
    RWU Bell Set This is the 9 bell set that maybe needed for the RWU or the KSU 9 bell top movements. They are sold separate from the movement as they are expensive and not always needed if just replacing an old unit. ...

    KIEN-BELLSET: $325.00

  • Bell Strike Clock Kit GMKIT07
    Bell Strike Clock Kit This quality chain driven Bell clock kit will strike the hours on a nice deep sounding bell, and then strike once for the half hour. This is a great clock kit for a small shaker style grandmother or granddaughter sized clock case. Here are some measurements you need to know to build your case, but of course the best thing to do is to get the movement first and then build the case afterward....

    GMKIT07: $399.00

  • Clock Repair Movement Test Stand Clock Repair Service or Customization
    CLEANING, OILING, and INSPECTION for only $150 Before Cleaning After Cleaning Why are we t...

    Clear

    REPAIR: $100.00$500.00

  • Clock Repair Movement Test Stand Clock Repair Service or Customization (Oil & Clean)
    CLEANING, OILING, and INSPECTION for only $150 Before Cleaning After Cleaning Why are we t...

    OIL-CLEAN: $150.00

  • GFKIT101 German Grandfather Clock Kit 1161
    " Assistance = 800-381-7458 Hermle 1161-853 Triple Chime Cable Driven 11 x 15.5 Moon Dial Lyre Pendulum Back 12 Rod Strike Movement = 140 x 220mm Serpentine Hands Made in Germany 3-year warranty Listen to Westminster Listen to Wittington Listen to St Micheals Grandfather Clock Kit is Outfitted a Decorative Presidential moving moon dial that is 11x15 1...

    Clear

    GFKIT101: $1,200.00

  • Grandfather Clock Kit GFKIT02
    Cable Driven, Triple Chime Clock Kit This quality cable driven clock kit has a triple chime movement that plays on the quarter hours. Then it will strike out the hourly count when its done with the chime. The chime selections are Westminster, Wittington, St Micheals or just silence. This is a larger clock size that will work with Grandfather clock cases. The clock case would need to be able to except the movements ...

    Clear

    GFKIT02: $1,149.00$1,189.00

  • Grandfather Clock Kit GFKIT03 Grandfather Clock Kit GFKIT03
    Kieninger Clock Kit is known to have the thickest plates in the clock industry. This cable driven triple chime movement plays 4/4 Westminster, Whittington, or St. Michaels chimes sound each quarter hour and strike the full hour. It has an automatic beat adjustment, over wind protection, removable cable drums, second hand sweep and a automatic night chime shutoff feature so it will not chime between 11PM and 7AM. Co...

    GFKIT03: $1,399.00