Clock Tools

Showing 1–16 of 46 results

• turned_in_out Oiling and Cleaning

  Clock Cleaning Solution Concentrate One Pint

  One pint of ammonia concentrate clock cleaning solution. Excellent for cleaning movements by hand, or to use with an ultrasonic cleaning machine. Mix 1 part of this solution to 10 parts of hot water.

  CL9: $20.00

  Clock Cleaning Solution Concentrate One Pint quantity

  ADD TO CART

• turned_in_out Oiling and Cleaning

  Needle Pen Clock Oiler

  Precision pen oiler that contains quality semi-synthetic general purpose clock oil. The long needle makes tough spots easy to reach. If it slides, grease it. If it spins, oil it.

  CT3: $17.00

  Needle Pen Clock Oiler quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Mainspring Clamps 4PC

  Comes in a set of 4 to keep a mainspring in the wound position. This keeps them under control while replacing them in the movement or barrel. Best to get two of these sets in order to have a pair with the correct size for the mainspring.

  CT2: $17.00

  Clock Mainspring Clamps 4PC quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Hand Puller Tool

  Remove stubborn hands and gears from a mechanical clock movement. The two jaw grab onto both sides of the hand or gear so it can be pulled off straight. This puller is 7/8 inch wide by about 1 1/2 inches tall.

  CU30: $17.00

  Clock Hand Puller Tool quantity

  ADD TO CART

• turned_in_out Clock Tools

  Mechanical Clock Bubble Level

  A simple yet practical level to help put a mechanical clock into beat or just level it for an even tick tock.

  CT33: $8.00

  Mechanical Clock Bubble Level quantity

  ADD TO CART

• turned_in_out Clock Tools

  Vision-Visor Magnification Headband

  This is a handy visor that can be worn over eyeglasses. It features a flip top that fits over the head. Certainly this item has the most convenient magnification for inspecting important components of the clock movement and parts.

  CT17: $31.00

  Vision-Visor Magnification Headband quantity

  ADD TO CART

• turned_in_out Oiling and Cleaning

  Brass Bristle Clock Cleaning Brush

  Brush, with wooden handle, for cleaning clocks. Behold this beautiful brass bristle brush which brings beauty to big bulky brass. Use this on stubborn spots of grime, along with cleaning solution.

  CL15: $8.00

  Brass Bristle Clock Cleaning Brush quantity

  ADD TO CART

• turned_in_out Clock Repair Tools

  Clock Let Down Tool Set of 4

  The let down tools set comes with a handle and 3 chucks that fits just about every winder arbor size. Put the chuck into the handle and then release the mainspring slowly with the hand grip.

  CT25: $50.00

  Clock Let Down Tool Set of 4 quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Movement Assembly Posts

  These Clock Movement Assembly Posts keep the movement plate flat. This makes for a workable platform to use during reassembly.

  CT10: $50.00

  Clock Movement Assembly Posts quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Mainspring Let-Down Tool Set of 2

  Use this tool to release the power in a wound up mainspring. The key goes into the chuck and the chuck goes into the handle so the power can be let down on the mainspring.

  CT26: $30.00

  Clock Mainspring Let-Down Tool Set of 2 quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Pivot Reaching Tool

  This tool is useful when reassembling the clock movement. It is of course a challenge to get the pivots to go into the holes in the outer clock plates.

  CT15: $17.00

  Clock Pivot Reaching Tool quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Loop-End Mainspring Winder Tool

  Winder for loop end mainsprings, for use with the mainspring clamps. This is to take a unwound loop end mainspring and wind it up to get a mainspring clamp onto it. When the C-clamp is on, it is much easier to manage in the clock movement assembly process.

  CT1: $28.00

  Clock Loop-End Mainspring Winder Tool quantity

  ADD TO CART

• turned_in_out Clock Tools

  Large Clock Tweezer Assortment

  Very useful set for reassembling movements and get the pivots back in there pivot holes. Sizes range from 5 inch to 7 inch long. Assorted tips and shapes on these very long tweezer set.

  CT40: $20.00

  Large Clock Tweezer Assortment quantity

  ADD TO CART

• turned_in_out Oiling and Cleaning

  Clock Cleaning and Oiling Kit

  Clock Cleaning and Oiling Kit offers the basic items required to clean a clock movement without disassembly. The basic kit is for weight driven movements. If you have a spring driven movement you will need to select the 2 piece let down tool to your order before adding it to the cart.

  CLCLKIT-1:

  View Product

• turned_in_out Oiling and Cleaning

  Keystone Clock Oil Bottle

  Keystone clock oil is a great mid grade oil for mechanical units. This bottle will last someone forever unless they are working on clocks full time.

  CL1: $28.00

  Keystone Clock Oil Bottle quantity

  ADD TO CART

• turned_in_out Clock Tools

  Clock Repair Small Pliers

  This set consists of 6 pieces with various shaped ends for crimping or cutting in clock repair. The overall length are between 5 and 6 inches. Easily get into tight places when locking in pivots or bending wire.

  CT38: $27.00

  Clock Repair Small Pliers quantity

  ADD TO CART