Chime Accessories

Showing all 7 results

• turned_in_out Chime Accessories

  Antique Rear-Mount Clock Gong

  This is a Rear mounted Antique new old stock clock gong. They have been sitting new for years and may have some surface rust. These gongs have a center mount with a round coil gong. These gongs are useful for wall clocks.

• turned_in_out Hardware for Clocks

  Brass Bell For Strike

  5 1/8" Wide round brass bell for a bell strike clock movement. Has a hole in the top and can be screwed to the wooden case. Typically mounts on the top side roof or bracket for an above strike hammer movement.

  BrassBell: $30.00

  Brass Bell For Strike quantity

  ADD TO CART

• turned_in_out Case / Mounting Parts

  Clock Chime block Mounts

  These are the screws and washers that mounts the chime block to the clock case. The chime block has threaded holes usually and these screws go through the case and into the chime block. These are the universal thread size for most chime blocks.

  CBMOUNT: $5.00

  Clock Chime block Mounts quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Clock Chime Selector Rod

  Clock chime selector rod provides an alternative to the chime selection switch. (The switch that would typically come through the dial at 3 o'clock.)

  SelectorRod: $15.00

  View Product

• turned_in_out Chime Accessories

  Mantle Clock Coil Gong

  The mantle gong is 3 1/2 inches in diameter with a brass end. The mounting base also comes with it. This base mounts to the clock case by wood screws. The gong has the mounting bushing on the side where it will mount to the base.

  GO5: $15.00

  Mantle Clock Coil Gong quantity

  ADD TO CART

• turned_in_out Chime Accessories

  Wall Clock Coil Gong

  Wall Clock Coil Gong 4 3/4 diameter with a brass center bushing. Includes the gong mount which mounts to the back of the clock case. There is a screw in the base that will come out, and go through the center bushing to mount this. Bend the wire on the hammer so it is about 1/8 inch away.

  GO4: $15.00

  Wall Clock Coil Gong quantity

  ADD TO CART

• turned_in_out Chime Accessories

  Wall Clock Coil Gong Mounting Base

  Wall Clock Coil Gong Mounting Base. The gong mount mounts to the back of the clock case. There is a screw in the base that will come out, and go through the center bushing to mount this to the case.

  GO4-Base: $8.00

  Wall Clock Coil Gong Mounting Base quantity

  ADD TO CART