German Mechanical Clock Hands

German Mechanical
These mechanical clock hands are for German mechanical clocks that are post WW2 and includes most mechanical clocks after 1950. Post war clocks are made in either Korea, China, or Germany. Of course, the Korean and China clocks are pretty easy to identify as they usually say 31 day on it. If this is the situation and the clock says 31 day, these hands will not fit.

If you would like to be certain the clock is from Germany, look at the back plate of the clock movement itself. There will always be a stamp with an engraving that says Made in Germany. These mechanical clock hands will fit 90% of these clocks. Although there are some exceptions. Some tubular bell units and some of the older German units are a couple of examples. To be absolutely 100% sure these hands are correct, measure the width of the mounting post on the movement and match it up with the sizes they specify.

Showing all 5 results

  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Serpentine Mechanical Clock Hands

    This is a set of Serpentine Mechanical Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

    CH3Hands: $8.00$20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Mechanical Clock Spade Hands

    Spade hands that fit most German mechanical clock movements. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter.

    CH1: $15.00$20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Spade Variant Clock Hands for German Clocks

    Hour and minute Spade Variant Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

    RC30: $15.00
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    German Maltese Clock Hands

    These German Maltese Clock Hands fit most German mechanical clock movements made after 1950. The hands are for a 5 inch time track only in this style. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter.

    CH12: $15.00
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    German Tapered Hands

    Metallic chrome tapered hands for a 14' time track. Minute hand is 7' from the center of the hole to the end. These hands are metallic chrome tone, not flat silver like the picture. These fit most German movements. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole. Hand Fix to Chime... View Product

    CH4: $15.00