All Clock Parts

Showing 1–16 of 287 results

• turned_in_out Quartz Clock Hands

  Spade Quartz Clock Hands #H2

  The hands are sold as a pair. Only the minute hand is measured from the center of the mounting hole to the end. The minute hand has an oblong mounting hole, the hour hand has a round one.

  H2: $1.00 – $5.00

  View Product

• turned_in_out Clock Pendulum Parts

  Clock Pendulum Suspension Spring Hanger

  Suspension springs are the most commonly needed part for a pendulum. It is called a suspension because it suspends the pendulum in the air. It is called a spring because it flexes back and forth. If a spare spring is ordered it would be a good idea. One can be put on the bottom of the weight section of the... View Product

  SUS100:

  View Product

• turned_in_out Quartz Clock Hands

  Serpentine Quartz Clock Hands #H1

  Serpentine quartz clock hands will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

  H1: $1.00 – $9.00

  View Product

• turned_in_out Quartz Clock Hands

  Spade High-Torque Clock Hands #HTH3

  Spade quartz clock hands for the standard "I" shaft battery clock movements. The hour hand will have a round hole and installed by friction. Minute hand will have an oblong hole.

  HTH3: $3.00 – $15.00

  View Product

• turned_in_out Quartz Clock Hands

  Tapered Quartz Clock Hands #H4

  Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

  H4: $1.00

  View Product

• turned_in_out Quartz Clock Hands

  Quartz Clock Second Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH3: $1.00

  View Product

• turned_in_out Quartz Clock Hands

  Battery Clock Second Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH2: $1.00

  View Product

• turned_in_out Quartz Clock Hands

  Quartz Clock Movement Second-Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH1: $1.00

  View Product

• turned_in_out Clock Keys

  Brass Single-End Clock Key

  Single end brass clock key to wind up a wall or mantle mechanical clock movement. See instructions on the top tabs for how to get the right size key for your clock. Almost all post 1960 mechanical clocks, made in Germany, take a size #8 key or crank. This is for the most part always true with the exception of... View Product

  CK4: $10.00

  View Product

• turned_in_out Quartz Clock Hands

  Diamond-shaped Quartz Clock Hands #H8

  Diamond-shaped quartz clock hands fit battery clock movements purchased from Clockworks. Minute hand has an oblong mounting hole whereas the hour hand has a round one.

  h8: $1.00

  View Product

• turned_in_out Clock Weight Accessories

  Clock Weight Top Hook

  Brass top weight hook for modern German clock movements such as Hermle / Urgos / Kieninger. Comes either with external threads or internal threads. The M* number is the thread size of the screw/bolt, M4 is 4mm, M5 is 5mm.

  WE6: $9.00

  View Product

• turned_in_out Quartz Clock Hands

  Tapered High-Torque Clock Hands #HTH1

  Tapered high-torque quartz clock hands are wide at the base and narrows down to a point on the pointer end of the hand. The measurement is done with the minute hand only but the hour hand will come with the set of hands.

  HTH1: $3.00 – $13.00

  View Product

• turned_in_out All Products

  Anniversary Clock Suspension Springs

  Anniversary Clock Suspension Springs Single Strength anniversary clock suspension springs in a three pack. These are come as the spring only with no fork or blocks.

  AN1: $9.00 – $20.00

  View Product

• turned_in_out Quartz Clock Hands

  Fancy Quartz Clock Hands #H9

  Fancy quartz clock hands for the standard "I" shaft battery clock movements. Basically if it takes a battery and you got it from clockworks.com, these will fit. We only carry the "I" shaft units.

  H9: $1.00

  View Product

• turned_in_out Hardware for Clocks

  Mechanical Clock Suspension Spring

  This is the most common suspension spring needed by far. Suspension A1 is for mantle clocks, A2 for wall and grandmother units. The suspension A3 is for larger floor clocks such as a grandfather clock.

  SUS-A: $10.00 – $25.00

  View Product

• turned_in_out Quartz Clock Hands

  Straight Quartz Clock Hands #H6

  Straight quartz clock hands for the standard "I" shaft battery clock movements. These will fit any battery movement sold by Clockworks.

  H6: $1.00

  View Product