All Products

Showing 1–16 of 631 results

• turned_in_out Time Only Clock Movements

  Time-Only Quartz Clock Movement

  When replacing a Time-only quartz clock Movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

  M2: $14.00

  View Product

• turned_in_out 4 3/4 Inch (121mm)

  Spade Quartz Clock Hands #H2

  The hands are sold as a pair. Only the minute hand is measured from the center of the mounting hole to the end. The minute hand has an oblong mounting hole, the hour hand has a round one.

  H2: $1.00 – $5.00

  View Product

• turned_in_out 4 11/16 Inch (119mm)

  Serpentine Quartz Clock Hands #H1

  Serpentine quartz clock hands will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

  H1: $1.00 – $8.00

  View Product

• turned_in_out Hardware for Clocks

  Mechanical Clock Suspension Spring

  This is the most common suspension spring needed by far. Suspension A1 is for mantle clocks, A2 for wall and grandmother units. The suspension A3 is for larger floor clocks such as a grandfather clock.

  SUS-A: $10.00 – $25.00

  View Product

• turned_in_out 2

  Mechanical Clock Pendulum Suspension

  Suspension springs are the most commonly needed part for a pendulum on a mechanical clock. It is called a suspension because it suspends the pendulum and hanger aka leader in the air.

  SUS100:

  View Product

• turned_in_out High Torque Clock Movements

  High Torque Clock Movement #HT1

  When replacing a High Torque clock movement, the threaded post will need to be measured. The post is the part that goes through the dial (face) for mounting the movement. [bulk-discount-shortcode sku="HT1"]

  HT1: $15.00

  View Product

• turned_in_out 3 5/8 Inch (92mm)

  Tapered Quartz Clock Hands #H4

  Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

  H4: $1.00

  View Product

• turned_in_out Quartz Clock Hands

  Quartz Clock Second Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH3: $1.00

  View Product

• turned_in_out 2

  Quartz Battery Clock Movement

  To replace a AA battery quartz clock movement, it is required to measure the post on the old movement. This is the wider threaded portion that mounts the movement by means of a hex nut. Hands sold separately. [bulk-discount-shortcode sku="M2"]

  M2-B:

  View Product

• turned_in_out Quartz Clock Hands

  Quartz Clock Movement Second-Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH1: $1.00

  View Product

• turned_in_out Quartz Clock Hands

  Battery Clock Second Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH2: $1.00

  View Product

• turned_in_out 17 3/4 Inch (451mm)

  Spade Super-Torque Clock Hands

  Spade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.

  HTH3: $13.00 – $15.00

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Time – Pendulum Clock Movement

  This time and pendulum quartz clock movement will run a light weight pendulum that is 16 inches at longest. The quartz pendulum we offer is 16 inches (406mm) at its total length, however this can be shortened. The pendulum is a separate purchase. [bulk-discount-shortcode sku="QU3"]

  QU3: $16.00

  View Product

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 2-1/8-Hole #F3

  Clock insert #F3 is a round friction fit clock that is 2 1/4 (59mm) wide. It fits snug in a 2 1/8 (54mm) hole, with an overall depth of 1 1/16 (27mm). [bulk-discount-shortcode sku="F3"]

  F3: $14.00

  View Product

• turned_in_out 400 Day Clock Parts

  Brass Single-End Clock Key

  Single end brass clock key to wind up a wall or mantle mechanical clock movement. See instructions on the top tabs for how to get the right size key for your clock. Most post 1960 mechanical clocks, made in Germany, take a size #8 key or crank.

  CK4: $10.00

  View Product

• turned_in_out 3 3/8 Inch (85mm)

  Flat-Tapered Quartz Clock Hands #H5

  Flat-Tapered quartz clock hands for time only clock movements sold by Clockworks. An hour hand with a round mounting hole for a friction fit.

  H5: $1.00 – $10.00

  View Product