Case / Mounting Parts

Showing all 12 results

  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    351-350 Clock Mounting Brackets

    Clock Movement Mounting Brackets set of 2. This is for a front mounting a Hermle 351 or 350 series clock movement. Do not remove all four hex nuts on the movement plates at once or it will come disassembled.

    RC23: $10.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Brass Bracket Clock Handle

    Solid brass and excellent quality brass handle for a bracket clock. Measures 3 1/2 inch wide, 1 1/2 inch tall to the top of the brass handle. A Bracket clock is a square clock case and this is the handle that mounts to the very top.

    CP43: $30.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Brass Clock Case Spiral Finial

    Brass clock case spiral finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall. The threaded screw is 4.5mm wide and the ball base is 48mm wide.

    CP11: $30.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Case Eagle Finial

    Clock Case Eagle Finial Brass decorative eagle finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall. The threaded screw is 4.5mm wide and the ball base is 48mm wide.

    CP12: $30.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Chime block Mounts

    These are the screws and washers that mounts the chime block to the clock case. The chime block has threaded holes usually and these screws go through the case and into the chime block. These are the universal thread size for most chime blocks.

    CBMOUNT: $5.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Movement Bar Mounts set of 4

    Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement. This allows you to have a unit that mounts in the rear. The nut comes off the pillar of the movement (one at a time so it does not disassemble). Then put this on the post, and lock it on with the... View Product

    RC22: $15.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Movement Mounting Brackets Dog-Ear Style

    Set of four dog ear shaped clock movement mounting brackets. These go onto the outer movement posts under the hex nut on each corner. By installing only one corner at a time the movement with its gears never come apart.

    CP29: $13.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Movement Seat-Board Screws

    Clock Movement Seat-Board Screws are for modern German floor clock models that have a seat-board. The rectangle washer goes under the seat-board and the screw goes up through it and into the movement posts. Sold as a pair of washers and 1 3/4 inch long screws.

    CP28: $15.00$25.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Wood Screw Assortment

    A large assortment of smaller sized wood screws all brass tone for case work or movement mounting. This is the best assortment for mounting mantle or cuckoo clock sized clock movements.

    CP19: $25.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Extended Post style Clock Mounts for German Units

    Extended Post style Clock Mounts for German Units Extended Post style Clock Mounts for German Units. These fit the Hermle 341 / 141 / 241 OR pick the 351 / 1051. This is the start of the Hermle movement number. This is the stamp on the back plate of the movement itself. The posts have internal threads on one side.... View Product

    RC5: $20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Mantle Clock Case Back

    Black metal case back for sound quality and dust protection on a mantel clock case. The round portion of this case back is 4 1/2 inches without the hook portion. This case back is easy to install on the back of the mantle clock.

    CP13: $10.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Small Wood Screw Assortment

    Ideal for case work, movement mounting, or a variety of small projects. This is the best assortment of screws for mounting mantle or cuckoo clock movements.

    CP19SM: $20.00